Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well DDR-240C-24 DC-DC Converter - 240W - 33.6~67.2V in 24V out
Notify me when it's back in stock
Your order will be processed within 24 hours
Mean Well DDR-240C-24 DC-DC Converter - 240W - 33.6~67.2V in 24V out
The DDR-240C is a 240W DIN Rail type DC-DC converter designed for rolling stock and railway applications requiring compliance with EN50155 standards. With an input range of 33.6~67.2Vdc (nominal 48Vdc), it converts from standard on-board DC bus supplies to isolated 12V, 24V, or 48V outputs. Built to withstand shock and vibration per IEC61373, it operates reliably from -40~+70°C and supports current sharing for higher-power parallel configurations.
Key Features
- ✓ 40mm wide — DIN rail TS-35 compatible
- ✓ Input voltage range: 33.6~67.2Vdc (nominal 48Vdc)
- ✓ DC output voltage adjustable ±10%
- ✓ 4KVdc reinforced I/O isolation
- ✓ Wide operating temperature: -40°C ~ +70°C
- ✓ Protections: Short circuit / Overload / Over voltage / Reverse polarity / Under voltage lockout
- ✓ DC OK relay contact output
- ✓ Remote ON/OFF control
- ✓ Current sharing up to 960W (parallel 3+1 units)
- ✓ Safety approvals: IEC 62368-1, UL 62368-1, AS/NZS 62368.1, EAC TP TC 004
- ✓ Railway standards: EN50155, IEC60571, IEC61373 (shock & vibration)
- ✓ 3 years warranty
-
BrandMean Well
-
SeriesDDR Series
-
Power Rating240 Watt
-
Output Voltage24 Volt
-
Rated Current10 Ampere
-
Input Voltage33.6V~67.2V
-
No of Output1
-
Dimming ControlNone
-
Standards MetCE,EMC,UL
-
Operation ModeConstant Voltage
-
Operating Temperature-40°C~85°C
-
Warranty2 Year
-
Length4.93 in
-
Width4.47 in
-
Height1.57 in
-
Weight1.68 lb
::specification::
Frequently Asked Questions
Can I use the DDR-240C-24 to convert a 48V battery bank to 24V for industrial automation equipment?
Yes. The DDR-240C-24 accepts 33.6-67.2V DC input and outputs 24V at up to 10A (240W), so it is well suited for stepping down a 48V battery system to power 24V PLCs, sensors, and motor drives in DIN rail-based automation panels. The 4KVdc I/O isolation protects sensitive control equipment from the battery bus.
Is the DDR-240C-24 suitable for powering 24V DC loads from a 48V telecom bus?
Yes. Telecom DC buses commonly operate at 48V nominal, which falls within the DDR-240C-24's 33.6-67.2V input range. At 240W and 10A output, it can supply 24V peripheral equipment such as switches, routers, or access controllers mounted in standard telecom racks.
Can the DDR-240C-24 power 24V embedded computing systems in a mobile or vehicle application?
Yes. If the vehicle's DC bus voltage stays within 33.6-67.2V, the DDR-240C-24 provides a stable 24V rail at up to 10A. Its fanless design and -40°C to +85°C operating range make it suitable for unventilated enclosures in buses, trains, or heavy equipment where vibration and temperature extremes are common.
Will the DDR-240C-24 operate reliably in an unheated outdoor DIN rail enclosure?
Yes. The DDR-240C-24 is rated for -40°C to +85°C and uses a fanless convection-cooled design with no moving parts to fail in extreme weather. As long as the enclosure shields it from direct water ingress, it will operate in cold-climate outdoor cabinets, rooftop equipment housings, and similar exposed installations.
Can I use the DDR-240C-24 in a solar energy system to step down a 48V panel string for 24V loads?
The DDR-240C-24 accepts 33.6-67.2V DC input, which can accommodate a 48V nominal solar bus with typical voltage fluctuations. It provides 240W at 24V/10A for loads such as monitoring systems, communication radios, or lighting controllers in off-grid solar installations.
What are the differences between the DDR-240B, DDR-240C, and DDR-240D models at the 24V output level?
All three provide 240W at 24V/10A output. The key difference is the input voltage range: the DDR-240B-24 accepts 16.8-33.6V DC (suited to 24V bus systems), the DDR-240C-24 accepts 33.6-67.2V DC (suited to 48V bus systems), and the DDR-240D-24 accepts 67.2-154V DC (suited to high-voltage DC distribution). All share the same DIN rail form factor and fanless design.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other DDR-240C Models
1 other model| Model | Power | Voltage | Current | IP Rating | Price | |
|---|---|---|---|---|---|---|
| Mean Well DDR-240C-48 DC-DC Converter - 240W - 33.6~67.2V in 48V out | 240W | 48V | 5A | Indoor | $93.78 | View |
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
