Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well GSM18E24-P1J Power Supply 18W 24V
The GSM18E24 is a 18W Mean Well power converter (input range: 80~264VAC).
Key Features
- ✓ Input voltage range: 80~264VAC
- ✓ 4KVAC reinforced I/O isolation
- ✓ Protections: Short circuit / Overload / Over voltage
- ✓ Safety approvals: ISOLATION LEVEL
- ✓ 3 years warranty
-
BrandMean Well
-
SeriesGSM Series
-
Power Rating18 Watt
-
Output Voltage24 Volt
-
Rated Current0.75 Ampere
-
Input Voltage80V~264V
-
No of Output1
-
Dimming ControlNone
-
Standards MetCB,CE,EAC,TUV,UL
-
Operation ModeConstant Voltage
-
Operating Temperature-25°C~60°C
-
Warranty3 Year
-
Length3.11 in
-
Width2.13 in
-
Height1.3 in
-
Weight0.44 lb
::specification::
Frequently Asked Questions
Can I use the GSM18E24-P1J for 24V PLC or HMI accessories?
This model outputs constant 24V DC at up to 0.75A, with 18W total power. That makes it a fit for low-power 24V PLC accessories, operator interface peripherals, or similar control devices that need a fixed 24V supply within that power range.
Is the GSM18E24-P1J suitable for small 24V industrial sensors or interface modules?
It can be used for 24V sensors, signal interfaces, or compact industrial modules that require constant-voltage input and draw no more than 0.75A. Loads above 18W would exceed this model's rating.
Can this power supply run a 24V embedded control device?
Yes, if the embedded control device is designed for 24V DC constant-voltage input and its current demand stays within 0.75A. The 80-264VAC input range also supports use across a broad AC input range.
Does the GSM18E24-P1J work for harsh indoor or outdoor conditions?
The specified operating temperature range is -25°C to +60°C. However, no IP rating is listed in the provided specs, so the product data does not confirm suitability for outdoor exposure, washdown, or dusty environments.
Is this a good choice when a device needs a fixed 24V source instead of a variable output?
Yes. The GSM18E24-P1J is a constant-voltage unit with a fixed 24V output, so it is intended for equipment that expects regulated 24V DC and can operate within the 18W and 0.75A limits.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
