Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well HLG-60H-30AB Power Supply 60W 30V - Adjustable and Dimmable
Notify me when it's back in stock
Your order will be processed within 24 hours
Mean Well HLG-60H-30AB Power Supply 60W 30V - Adjustable and Dimmable
The HLG-60H is a 60W Mean Well power converter (input range: 90~305VAC).
Key Features
- ✓ Input voltage range: 90~305VAC
- ✓ DC output voltage adjustable ±10%
- ✓ 3.75KVAC reinforced I/O isolation
- ✓ Cooling by free air convection
- ✓ Protections: Short circuit / Over voltage / Over temperature
- ✓ Active PFC — meets international energy efficiency regulations
- ✓ Safety approvals: Note.8 SAFETY &
- ✓ 3 years warranty
-
BrandMean Well
-
SeriesHLG Series
-
Power Rating60 Watt
-
Output Voltage30 Volt
-
Rated Current2 Ampere
-
Input Voltage90V~305V
-
No of Output1
-
Dimming Control10V PWM,1-10V,Built-in Potentiometer,Resistance
-
Standards MetCB,CCC,CE,EAC,PSE,RCM,TUV,UL
-
Operation ModeConstant Current,Constant Voltage
-
Operating Temperature-40°C~80°C
-
Warranty7 Year
-
Length6.73 in
-
Width2.42 in
-
Height1.45 in
-
Weight1.61 lb
::specification::
Frequently Asked Questions
Can I use the HLG-60H-30AB to power dimmable 30V LED signage?
Yes. The HLG-60H-30AB outputs 30V at up to 2A (60W) and includes both output voltage/current adjustment and a 1-10V/PWM dimming input. This makes it well suited for channel-letter signs or lightbox displays where you need to fine-tune brightness and match the exact voltage requirements of your LED modules.
Is the HLG-60H-30AB a good choice for 30V LED strip accent lighting with dimming?
Yes. It delivers 60W at 30V with built-in dimming via 1-10V or PWM signal, so you can adjust brightness for cove lighting, display cases, or architectural accents. The adjustable output also lets you dial in the precise voltage and current your 30V strip needs.
Can I use the HLG-60H-30AB to drive 30V LED panels in a retail display?
Yes, provided your panels draw no more than 60W total. The HLG-60H-30AB operates in constant-current mode across a CC range of 18-30V, accommodating panels that may run at slightly lower voltages. The dimming input lets you reduce brightness during store off-hours.
How many meters of 30V LED strip can the HLG-60H-30AB power?
Divide 60W by your strip's rated power per meter. For example, a 30V strip rated at 10W/m would allow up to 6 meters (60W / 10W per meter = 6m). A higher-density strip at 15W/m would allow 4 meters. Always check your strip's rated power per meter and keep the total load at or below 60W.
Can the HLG-60H-30AB be mounted outdoors in a sheltered location?
Yes. Its IP65 rating protects against low-pressure water jets and dust ingress, making it suitable for covered outdoor areas such as canopies, soffits, or weatherproof enclosures. For locations exposed to direct rain or standing water, consider the IP67-rated HLG-60H-30B instead.
What are the differences between the HLG-60H-30, 30A, 30AB, and 30B models?
All four share the same 60W / 30V / 2A core specs with a CC range of 18-30V. The base HLG-60H-30 has fixed output and IP67 waterproofing. The -30A adds output voltage/current adjustment via potentiometer (IP65). The -30AB adds both adjustment and 1-10V/PWM dimming (IP65). The -30B provides dimming only and retains IP67.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
