Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well HVG-150-54AB Power Supply 150W 54V - Adjustable and Dimmable
Notify me when it's back in stock
Your order will be processed within 24 hours
Mean Well HVG-150-54AB Power Supply 150W 54V - Adjustable and Dimmable
Description
Description
Features
| 180~528VAC wide input range |
| IP67 / IP65 design |
| Built-in active PFC |
| Protections: Short circuit / Over current / Over voltage / Over temperature |
| C.V. +C.C. mode design |
| Class 2 power unit |
| High efficiency up to 91.5% |
| Cooling by free air convection |
| Suitable for dry, damp. and wet location |
| Suitable for LED lighting and street lighting applications |
| Output current adjustable through output cable or internal potentiometer |
| Multiple models for choice: A-Type: IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer B-Type: IP67 rated and built-in 3 in 1 dimming function (0~10VDC, PWM signal, or resistance) D-Type (option): IP67 rated. Timer dimming function, contact MEAN WELL for details |
| 5 years warranty |
General Specification
| AC input voltage range | 180~528VAC (single phase); 254~747VDC |
| AC inrush current (max.) | Cold start, 35A at 480VAC |
| DC adjustment range | ±10% rated output voltage |
| Current adjustment range | 55%~100% |
| Over current protection | 95%~108% constant current limiting, auto-recovery |
| Over voltage protection | 110%~140% rated output voltage |
| Withstand voltage | I/P-O/P: 3.75kVAC, I/P-FG: 2kVAC, O/P-FG: 0.5kVAC |
| Working temperature | -40~+70ºC (refer to output derating curve) |
| Safety standards | UL8750 approved |
| EMC standards | EN55015, EN61000-3-2 class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547, FCC part 15 class B |
| Connection Input | UL rated, STW 18AWGx3C (30cm) |
| Connection Output A&D-Type | SJTW 14AWGx2C (30cm) |
| Connection Output B-Type | SJTW 14AWGx2C (30cm) + UL2517 18AWGx2C (30cm) |
| Dimension (LxWxH) (mm) | 245x 68x 38.8 |
Specifications
Specifications
-
BrandMean Well
-
SeriesHVG Series
-
Power Rating150.12 Watt
-
Output Voltage54 Volt
-
Rated Current2.78 Ampere
-
Input Voltage180V~528V
-
No of Output1
-
Dimming Control10V PWM,1-10V,Built-in Potentiometer,Resistance
-
Standards MetEAC,FCC,UL
-
Operation ModeConstant Current,Constant Voltage
-
Operating Temperature-40°C~85°C
-
Warranty5 Year
-
Length9.65 in
-
Width2.68 in
-
Height1.53 in
-
Weight2.73 lb
File Downloads
File Downloads
::specification::
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Frequently Asked Questions
Can I use the HVG-150-54AB for long 54V LED strip runs?
Yes, if the strip is designed for 54V and the full run stays within 150.12W. This model supplies up to 2.78A at 54V, which supports higher-voltage lighting systems with lower current than comparable lower-voltage drivers. Check your strip rated power per meter before calculating the maximum length.
Is this driver suitable for 54V signage lighting or illuminated display frames?
It can be used for 54V signage and display lighting loads that fit within its 150.12W rating. The constant-current operating range is 29-54V, so the connected LED load needs to be compatible with that range. Its IP65 water-resistant housing makes it better suited to protected outdoor or indoor commercial installations.
Can the HVG-150-54AB be used for architectural accent lighting?
It is suitable for 54V architectural LED lighting systems that need up to 150.12W and up to 2.78A output. The aluminium casing and -40°C to +85°C operating temperature range make it usable in demanding ambient conditions. Use it where an IP65 water-resistant enclosure is appropriate rather than where full IP67 waterproofing is required.
What LED strip length can I estimate from this 54V 150.12W driver?
Estimate strip length by dividing 150.12W by the strip's watts per meter. For example, a 54V strip rated at 20W/m would estimate to about 7.51m because 150.12 / 20 = 7.506. Check your strip rated power per meter and keep the total load within 150.12W and 2.78A.
Is the HVG-150-54AB suitable for wet outdoor areas?
It is rated IP65, so it is water-resistant and suited to outdoor locations where the driver is not subjected to full submersion-level exposure. That makes it appropriate for damp or sheltered exterior environments, but less sealed than an IP67 version. Its operating range of -40°C to +85°C supports hot and cold conditions.
What are the sibling options around the HVG-150-54AB?
Within the same 54V family, HVG-150-54A, HVG-150-54AB, and HVG-150-54B are all rated 150.12W, 54V, and 2.78A. The lower-power sibling is HVG-150-54D at 120W. If you need a smaller or larger 54V option, the series also includes 95.58W 54V 1.77A models in the 100 range and 243W 54V 4.5A or 324W 54V 6A models in the 240 and 320 ranges.
