Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well SRS-2415 DC-DC Converter - 0.5W - 21.6~26.4V in 15V out
The SRS is a 0.5W Mean Well power converter.
Key Features
- ✓ 1KVDC reinforced I/O isolation
- ✓ Protections: Short circuit / Overload
- ✓ Safety approvals: WITHSTAND VOLTAGE ISOLATION RESISTANCE ISOLATION CAPACITANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION WEIGHT -25 ~ +105 ± 0.03% / ℃ ℃ , 10 ~ 95% RH ℃ ) (0 ~ 50 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes EAC TP TC 004
- ✓ 3 years warranty
-
BrandMean Well
-
SeriesSRS Series
-
Power Rating0.5 Watt
-
Output Voltage15 Volt
-
Rated Current0.03 Ampere
-
Input Voltage21.6V~26.4V
-
No of Output1
-
Dimming ControlNone
-
Standards MetCE,EMC,FCC
-
Operation ModeConstant Voltage
-
Operating Temperature-25°C~71°C
-
Warranty2 Year
-
Length0.89 in
-
Width0.39 in
-
Height0.33 in
-
Weight0.01 lb
::specification::
Frequently Asked Questions
Can I use the SRS-2415 for a low-current 15V rail in a 24VAC automation system?
Yes, it is suitable for generating a fixed 15V rail from a 21-26VAC source in low-power automation electronics. The output is limited to 15V at 0.03A and 0.5W, so it is intended for light auxiliary circuits rather than larger 15V loads.
Is the SRS-2415 suitable for a compact 15V instrumentation circuit?
It can be suitable for a compact 15V instrumentation circuit when the circuit only needs a small constant-voltage supply from 21-26VAC. The low 0.03A output current makes it a fit for light-duty analog or reference sections rather than heavier modules.
Can this converter support a 15V embedded interface stage powered from 24VAC?
Yes, it can support a 15V embedded interface stage if the source is within 21-26VAC and the load stays inside the 0.5W rating. Its small 22.6 x 9.9 x 8.4 mm package is also useful where board space is constrained.
Would the SRS-2415 work for a small 15V bias supply in control electronics?
It can work for a small 15V bias or support supply in control electronics when only 0.03A is required. Because it provides constant voltage, it is intended for circuits that need a stable 15V rail rather than variable-output applications.
Is the SRS-2415 rated for outdoor or dirty industrial environments?
The spec sheet gives an operating temperature range of -25C to +71C, so temperature capability is defined. No IP rating is listed, so the provided data does not establish suitability for exposed outdoor, wet, or dusty locations, which points toward protected enclosure use instead.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
