Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well SPB09C-12 DC-DC Converter - 9W - 36~75V in 12V out
Remote ON/OFF control
9V model available(optional)
3 years warranty
Key Features
- ✓SIP8 package with industry-standard pinout
- ✓2:1 wide input range
- ✓Wide operating temperature range -40~+90°C
- ✓No minimum load required
- ✓High efficiency up to 89%
- ✓Protection: Short circuit(continuous)/Overload/Input under voltage
- ✓1.5KVDC I/O isolation
- ✓Remote ON/OFF control
- ✓9V model available(optional)
- ✓3 years warranty
-
BrandMean Well
-
SeriesSPB Series
-
Power Rating9 Watt
-
Output Voltage12 Volt
-
Rated Current0.75 Ampere
-
Input Voltage36V~75V
-
No of Output1
-
Dimming ControlNone
-
Standards MetCE,EAC
-
Operation ModeConstant Voltage
-
Operating Temperature-40°C~90°C
-
Warranty3 Year
-
Length0.98 in
-
Width0.44 in
-
Height0.38 in
-
Weight0.01 lb
::specification::
Frequently Asked Questions
Can I use the SPB09C-12 for a 12V PLC accessory or automation interface card?
Yes, if the accessory requires constant 12V and the available source is within 36-75VAC. This converter is rated for 9W output and listed at 750A output current, so those are the figures to match against the device requirement.
Is this 12V converter a fit for compact industrial monitoring electronics?
It is intended for constant 12V output from a 36-75VAC input range, which can suit compact monitoring or control electronics in industrial equipment. The key electrical limits in the specs are 9W total power and 12V output.
Can the SPB09C-12 support embedded 12V subsystems in control cabinets?
It can be used where an embedded subsystem needs regulated 12V and the upstream supply falls within 36-75VAC. Its small 24.9 x 11.2 x 9.6 mm size also makes it suitable where board space is limited.
Would this work for low-power 12V signal conditioning hardware?
For low-power 12V signal conditioning or interface hardware, this model can fit if the load stays within its 9W rating. It provides constant 12V output and is specified for 36-75VAC input operation.
Can I use the SPB09C-12 outdoors or in unprotected environments?
The operating temperature range is -40°C to +90°C, so the thermal specification is broad. However, no IP rating is listed, so the product data does not establish outdoor or direct-exposure suitability without a protective enclosure.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
