Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
ENVO ZigBee AC Phase Dimmer
Overview
EV-ZB9101SAC-HP is the 100-240VAC output model of this series.
Features
- ZigBee AC phase cut dimmer based on latest ZigBee 3.0 protocol
- 100-240VAC Wide Input and Output Voltage
- Supports resistive loads and capacitive loads
- 1 Channel Output, Up to 400W
- Input and Output with Screw Terminals, Safe and Reliable
- Both leading edge version and trailing edge version are available for choosing, default factory setting is trailing edge
- Enables to control ON/OFF and light intensity of connected triac dimmable led light or led driver
- ZigBee end device that supports Touchlink commissioning
- Can directly pair to a compatible ZigBee remote via Touchlink without coordinator
- Supports self-forming zigbee network without coordinator and add other devices to the network
- Supports find and bind mode to bind a ZigBee remote
- Supports zigbee green power and can bind max. 20 zigbee green power remotes
- Compatible with universal ZigBee gateway products
- Can be controlled by universal 8-230V input single wire push switch
- Mini Size, Easy to be Installed into a standard 86*86mm wall box
- Radio Frequency : 2.4GHz
- Waterproof grade: IP20
Specifications
Product Data
- Input Voltage
- 100-240VAC
- Output Voltage
- 100-240VAC
- Output Current
- 1.8A max
- Size(LxWxH)
- 45.5x45x20.3mm
Compatible Load Types
- Dimmable LED lamps
- 200W @ 230V, 100W @ 120V; Due to variety of LED lamp designs, maximum number of LED lamps is further dependent on power factor result when connected to dimmer.
- Dimmable LED drivers
- 200W @ 230V, 100W @ 120V; Maximum permitted number of drivers is 200W divided by driver nameplate power rating.
- Incandescent lighting, HV Halogen lamps
- 400W @ 230V 200W @ 120V
- Low voltage halogen lighting with electronic transformers
- 200W @ 220V 100W @ 110V
Certifications & ratings
- Certification marks
- CE, FCC, RoHS
Test conditions and notes8
- 1) Directly TouchLink (both not added to a ZigBee network), each device can link with 1 remote.
- 2) TouchLink after both added to a ZigBee network, each device can link with max. 30 remotes.
- 3) To control by both gateway & remote, add remote and device to network first then TouchLink.
- 4) After TouchLink, the device can be controlled by the linked remotes.
- Note: All configuration parameters will be reset after the device is reset or removed from the network.
- Note: Make sure the device already added to a network, the remote added to the same one or not added to any network.
- Note: Make sure the device and remote already added to the same zigbee network.
- Note: Each device can learn to max. 20 zigbee green power switches.
Downloads
Datasheet1
FAQ
What type of lighting is the ENVO ZigBee AC Phase Dimmer designed to control?
This model is designed to control triac dimmable LED lights or LED drivers using AC phase cut dimming. It supports both resistive and capacitive loads, making it suitable for a range of compatible dimmable AC lighting applications. It is a 1-channel dimmer intended for on/off control and light intensity adjustment.
Does this dimmer work with ZigBee 3.0 systems?
Yes. The EV-ZB9101SAC-HP uses ZigBee 3.0 and is compatible with universal ZigBee gateway products. It also supports Touchlink commissioning, find-and-bind mode, and ZigBee Green Power remote binding.
Can the ENVO ZigBee AC Phase Dimmer be used without a ZigBee coordinator?
Yes. This dimmer can directly pair with a compatible ZigBee remote through Touchlink without requiring a coordinator. It also supports self-forming ZigBee networking, which adds flexibility for standalone control scenarios.
What are the electrical ratings of this dimmer?
The ENVO ZigBee AC Phase Dimmer operates on 100-240VAC input and output voltage. It provides 1 channel with up to 400W capacity, and the specification lists output current up to 1.8A max. These ratings make it suitable for AC phase dimming within its stated load limits.
What makes this model different from basic non-networked AC dimmers?
This model adds ZigBee 3.0 wireless control instead of functioning only as a local dimmer. It supports gateway-based control, direct remote pairing, Touchlink, and ZigBee Green Power remotes. That makes it a stronger fit for smart lighting projects that need broader control options.
Where can this dimmer typically be used?
Its compact 45.5 x 45 x 20.3 mm housing is intended for installations where space is limited, including standard 86 x 86 mm wall box applications. With IP20 protection, it is intended for indoor use in dry environments. It is not designed for exposure to moisture.
What operating conditions is this dimmer rated for?
The unit carries an IP20 rating, so it should be used in indoor locations where it will remain dry. It operates on a 100-240VAC input voltage. These limits are important for maintaining normal performance and product longevity.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
