Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well NTU-1200-124US True Sine Wave DC-AC Inverter 1200W 110V out 24V in with US Socket
Notify me when it's back in stock
Your order will be processed within 24 hours
Mean Well NTU-1200-124US True Sine Wave DC-AC Inverter 1200W 110V o...
Overview
NTU-1200-124US is the model of this series: typical efficiency 90%.
NTU-1200 is a 1200W highly reliable off-grid true sine wave DC-AC power inverter with built-in UPS function(AC by-pass). Its key features include: digital design with MCU control, streamlined control circuitry that quickly responds to environmental changes and improves reliability, high quality fan with low acoustic noise, 2000W peak power, adjustable AC output voltage and frequency, -25~+70℃ wide operating temperature range, complete protection features, and etc. Combined with batteries, the NTU-1200 is suitable for use in residential, commercial, marine, automobile, mine, construction site, and remote areas with no access to utility power, and the output can be used to power fans, TV, radio, phone charger, PC/laptop, lighting, induction stove, air conditioner, electromechanical tool, communication equipment, power distribution cabinet, outdoor camping equipment, marine AC power, factory equipment, and etc.
Features
- Built-in UPS function (AC by-pass)
- True sine wave output (THD<3%)
- High surge power up to 2000W
- Temperature controlled cooling fan
- AC output voltage and frequency selectable by DIP S.W
- -25℃~+70℃ wide operating temperature
- Power ON-OFF remote control
- Front panel indicator for operation status
- Protections : Input : Reverse polarity / DC low alarm / DC low shutdown / Over voltage Output : Short circuit / Overload / Over temp.
- Battery over discharge protection (low voltage disconnect)
- Suitable for lead-acid or li-ion batteries
- Remote controller (IRC1, IRC2, IRC3 accessory sold separately, please refer to: https://www.meanwell.com/webapp/product/search.aspx?prod=IRC1)
- Support RS-232 communication(Communication cable order No.: RJ11-RS232, sold sperately)
- Carry handle accessory available(Order NO.: Carry handle, sold separately)
- Conformal coating
- 3 years warranty
Specifications
AC OUTPUT
- RATED POWER(Continuous)
- 1200W
- OVER RATED POWER(3 Min.)
- 1380W
- PEAK POWER(10 Sec.)
- 1800W
- SURGE POWER(30 Cycles)
- 2000W
- AC VOLTAGE
- Default setting set at 110VAC 100 / 110 / 115 / 120Vac selectable by DIP S.W
- FREQUENCY
- Default setting set at 60±0.1Hz 50/60Hz selectable by DIP S.W
- WAVEFORMNote.1
- True sine wave (THD<3%)
- AC REGULATION
- ±3.0% at rated output voltage
- FRONT PANEL LED
- Please see page 5
DC INPUT
- DC VOLTAGE
- 24Vdc
- VOLTAGE RANGE (Typ.)
- 20 ~ 33Vdc
- DC CURRENT (Typ.)
- 60A
- NO LOAD DISSIPATION (Typ.) NON-SAVING MODE
- 15W
- NO LOAD DISSIPATION (Typ.) SAVING MODE
- Default disable, auto detect AC output load≦10W will be changed to saving mode <8W
- OFF MODE CURRENT DRAW
- ≦1mA
- EFFICIENCY (Typ.)Note.1
- 90%
- BATTERY TYPES
- Lead Acid or li-ion
PROTECTION
- FUSE (INTERNAL)
- 40A*2
- LOW ALARM
- 22±0.5Vdc
- LOW SHUTDOWN
- 20±0.5Vdc
- LOW RESTART
- 25±0.5Vdc
- HIGH ALARM
- 31±0.5Vdc
- HIGH SHUTDOWN
- 33±0.5Vdc
- HIGH RESTART
- 30±0.5Vdc
- BAT. POLARITY
- By internal fuse open
- OVER TEMPERATURE
- Protection type : Shut down o/p voltage, re-power on to recover
- OUTPUT SHORT
- Protection type : Shut down o/p voltage, re-power on to recover
- OVER LOAD (Typ.)
- 105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec. Protection type : Shut down o/p voltage, re-power on to recover
- CIRCUIT BREAKER
- 15A
- GFCI PROCTECTION
- UL458 (Only for “GFCI” AC socket, by request)
FUNCTION
- REMOTE CONTROL CONNECTOR
- Power ON-OFF remote control by front panel dry contact connector(by RELAY), Open : Normal work ; Short : Remote off
- REMOTE CONTROL ACCESSORY
- Remote controller sold separately, Order No.: IRC1,IRC2,IRC3
- RS-232 COMMUNICATION
- RS-232 ~ RJ11 Type connector (Please refer to page 4 for more details)
AC UPS MODE
- AC INPUT RANGE
- 100/110/115/120Vac±16%, recover±13%
- FREQUENCY RANGE
- 45 ~ 65Hz
- TRASFER TIME(Typ.)
- 10ms inverter <--> AC by pass
ENVIRONMENT
- WORKING TEMP.
- -25 ~ +70℃(Refer to “Derating curve”)
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -30 ~ +70℃ / -22 ~ +158oF, 10 ~ 95% RH non-condensing
- VIBRATION
- 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC (Note.4)
- SAFETY STANDARDS
- CB IEC62368-1,Dekra BS EN/EN62368-1,UL458, E13,EAC TP TC 004 approved; Design refer to AS/NZS 62368.1 (Please refer to next page “AC output socket” table for more details )
- WITHSTAND VOLTAGE
- DC I/P - AC I/P:3.0KVac DC I/P - AC O/P:3.0KVac AC O/P - FG:1.5KVac
- EMC EMISSION
-
Parameter Standard Test Level Radiated FCC for 112,124,148 only(expect for Type-UN) Class A Radiated BS EN/ EN55032(CISPR32) for 212,224,248 only(expect for Type-UN) Class A Conducted FCC for 112,124,148 only(expect for Type-UN) Class A Conducted BS EN/ EN55032(CISPR32) for 212,224,248 only(expect for Type-UN) Class A Harmonic Current BS EN/EN61000-3-2 Class A Voltage Flicker BS EN/EN61000-3-3 - EMC IMMUNITY
-
BS EN/ EN55024, BS EN/ EN55035
Parameter Standard Test Level ESD BS EN/EN61000-4-2 Level 3, 8KV air; Level 2, 4KV contact Radiated BS EN/EN61000-4-3 Level 2 EFT / Burst BS EN/EN61000-4-4 Level 2, 1KV Surge BS EN/EN61000-4-5 Level 3, 1KV/Line-Line 2KV/Line-Earth Conducted BS EN/EN61000-4-6 Level 2 Magnetic Field BS EN/EN61000-4-8 Level 1 Voltage Dips and Interruptions BS EN/EN61000-4-11 >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods
OTHERS
- MTBF
- 460.5K hrs min. Telcordia TR/SR-332 (Bellcore) ; 58.3K hrs min. MIL-HDBK-217F (25℃)
- DIMENSION
- 333*184*70mm (L*W*H)
- PACKING
- 3.3Kg; 2pcs/ 7.6Kg/ 1.25CUFT
Test conditions and notes4
- 1.Efficiency, AC regulation and THD are tested by 900W load, linear load at 12.5Vdc/25Vdc/50Vdc input voltage.
- 2.All parameters not specified above are measured at rated load, 25℃ of ambient temperature and set to factory setting.
- 3.Internal pre-start circuit, the setup time is 8s.
- 4.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )
Technical drawings
Typical applications
- Home and office applianc
- Power tools
- Portable equipment
- Vehiclc
- Yacht
- Off-grid solar power system
- Wireless network
- Telecom or datacom system
Downloads
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
