Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well OWA-120U-15 Power Supply Moistureproof 120W 15V 8A
Notify me when it's back in stock
Your order will be processed within 24 hours
Mean Well OWA-120U-15 Power Supply Moistureproof 120W 15V 8A
Overview
OWA-120U-15 is the 15V output model of this series: rated current 8A, rated power 120W, typical efficiency 88%.
OWA-120U is one 120W single-output external LED power supply series. Pairing the North American type of AC plug and the prevailing DC connectors, OWA-120U, working like an adaptor, simplifies the connection with LED lighting fixtures without extra wiring efforts. The entire series is certified with the "UL LISTED" for dry and damp locations. As a class Ⅱ (no FG) design, the enclosure of OWA-120U is a 94V-0 flame retardant plastic case. The interior is fully potted with silicone that enhances the heat dissipation. With the working efficiency up to 90.5%, OWA-120U is cooled by free air convection; the working temperature ranges from -40℃ to +70℃.
Features
- Universal AC input / Full range
- Class Ⅱ power unit, no FG
- Built-in active PFC function
- High efficiency up to 90.5%
- No load power consumption <0.15W
- Energy efficiency Level Ⅵ
- Comply with EISA 2007/DoE,NRCan
- Fully isolated plastic case
- Fanless design, cooling by free air convection
- Protections: Short circuit / Over current / Over voltage / Over temperature
- UL LISTED, suitable for dry and damp locations
- Various DC plug quick adapter accessory available (Plug kit sold sperately, please refer to : https://www.meanwell.com/upload/pdf/DC_plug.pdf)
- 5 years warranty
Specifications
OUTPUT
- DC VOLTAGE
- 15V
- CONSTANT CURRENT REGION
- 9 ~ 15V
- RATED CURRENT
- 8A
- RATED POWER
- 120W
- RIPPLE & NOISE (max.)Note.2
- 150mVp-p
- VOLTAGE TOLERANCENote.3
- ±4.0%
- LINE REGULATION
- ±0.5%
- LOAD REGULATION
- ±1.5%
- SETUP, RISE TIMENote.4
- 500ms, 80ms at 95% load 230VAC / 115VAC
- HOLD UP TIME (Typ.)
- 16ms at full load 230VAC / 115VAC
INPUT
- VOLTAGE RANGE
- 90 ~ 264VAC 127 ~ 370VDC
- FREQUENCY RANGE
- 47 ~ 63Hz
- POWER FACTOR (Typ.)
- PF>0.97/115VAC, PF>0.96/230VAC at full load
- TOTAL HARMONIC DISTORTION
- THD< 20% when output loading≧60% at 115VAC/230VAC
- EFFICIENCY (Typ.) 115VAC
- 88%
- EFFICIENCY (Typ.) 230VAC
- 89%
- AC CURRENT (Typ.)
- 1.3A / 115VAC 0.65A / 230VAC
- INRUSH CURRENT (Typ.)
- COLD START 30A(twidth=520μs measured at 50% Ipeak) at 115VAC COLD START 60A(twidth=520μs measured at 50% Ipeak) at 230VAC
- MAX. NO. of PSUs on 16A CIRCUIT BREAKER
- 4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
- LEAKAGE CURRENT
- <0.125mA / 120VAC <0.25mA / 240VAC
PROTECTION
- OVER CURRENT
- 95 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed
- SHORT CIRCUIT
- Hiccup mode, recovers automatically after fault condition is removed
- OVER VOLTAGE
- 17.5 ~ 21V Protection type : Shut down o/p voltage, re-power on to recover
- OVER TEMPERATURE
- Shut down o/p voltage, re-power on to recover
ENVIRONMENT
- WORKING TEMP.
- -40 ~ +70℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20 ~ 95% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -40 ~ +80℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03%/℃ (0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC
- SAFETY STANDARDS
- UL8750 listed, CSA C22.2 No. 250.13-12; IP67(for power body) approved
- WITHSTAND VOLTAGE
- I/P-O/P:3.75KVAC
- ISOLATION RESISTANCE
- I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
- Compliance to FCC Part15
OTHERS
- MTBF
- 2902.2K hrs min. Telcordia SR-332 (Bellcore) 294.4K hrs min. MIL-HDBK-217F (25℃)
- DIMENSION
- 191*63*37.5mm
- PACKING
- 1.15Kg; 12pcs/13Kg/0.89CUFT
Test conditions and notes4
- 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
- 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
- 3. Tolerance : includes set up tolerance, line regulation and load regulation.
- 4. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
Technical drawings
Typical applications
- Indoor LED lighting
- LED decorative lighting
- LED office lighting
- General electronic products in dusty or humid environment
Downloads
Datasheet1
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other OWA-120U Models
8 other models| Model | Power | Voltage | Current | IP Rating | Price | |
|---|---|---|---|---|---|---|
| Mean Well OWA-120U-54 Power Supply Moistureproof 124.2W 54V 2.3A | 124.2W | 54V | 2.3A | IP67 | $53.15 | View |
| Mean Well OWA-120U-48 Power Supply Moistureproof 120W 48V 2.5A | 120W | 48V | 2.5A | IP67 | $53.15 | View |
| Mean Well OWA-120U-42 Power Supply Moistureproof 121.8W 42V 2.9A | 121.8W | 42V | 2.9A | IP67 | $53.15 | View |
| Mean Well OWA-120U-36 Power Supply Moistureproof 122.4W 36V 3.4A | 122.4W | 36V | 3.4A | IP67 | $53.15 | View |
| Mean Well OWA-120U-30 Power Supply Moistureproof 120W 30V 4A | 120W | 30V | 4A | IP67 | $53.15 | View |
| Mean Well OWA-120U-24 Power Supply Moistureproof 120W 24V 5A | 120W | 24V | 5A | IP67 | $53.15 | View |
| Mean Well OWA-120U-20 Power Supply Moistureproof 120W 20V 6A | 120W | 20V | 6A | IP67 | $53.15 | View |
| Mean Well OWA-120U-12 Power Supply Moistureproof 120W 12V 10A | 120W | 12V | 10A | IP67 | $53.15 | View |
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
