Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well XLC-40-24-S LED Driver 40.8W 24V with Strain-relief
Key Features
- ✓Constant power mode output with multiple stages selectable by dip switch or NFC setting(H-type)
- ✓Constant voltage mode output (12V/24V)
- ✓Plastic housing with class II/2 and PFC design
- ✓Flicker-free, complying with IEEE1789/ErP
- ✓Standby power consumption <0.5W
- ✓Meet emergency lighting (EL) function application
- ✓Minimum dimming level 0.1% (DALI-2 DT6)
- ✓Dimming functions: 3 in 1 dimming (Dim-to-off) DALI-1 + Push dimming
- ✓5 years warranty
-
BrandMean Well
-
SeriesMean Well XLC Series
-
Power Rating40.8 Watt
-
Output Voltage24 Volt
-
Rated Current1.7 Ampere
-
Input Voltage100V~305V
-
No of Output1
-
Dimming ControlNon Dimmable
-
Standards MetCB,CCC,CE,EAC,ENEC,SELV
-
Operation ModeConstant Voltage
-
Operating Temperature-25°C~90°C
-
Warranty5 Year
-
Length5.79 in
-
Width1.26 in
-
Height1.57 in
::specification::
Frequently Asked Questions
Can I use the XLC-40-24-S to power 24V LED strips in a suspended ceiling linear lighting system?
Yes, the XLC-40-24-S is suitable for suspended or pendant linear lighting where cables are routed under mechanical tension. The strain-relief prevents cable fatigue at the driver output exit, which is important when the cable runs vertically from a ceiling-mounted driver to a lower suspended fixture. The 40.8W at 24V provides sufficient power for medium-length 24V LED strip runs.
Is the XLC-40-24-S a good choice for powering 24V LED tape in office task lighting panels?
Yes, the XLC-40-24-S can power 24V LED tape in office task or troffer-style lighting panels. The flicker-free output is beneficial in office environments where sustained flicker can cause eye fatigue, and the 40.8W rating supports moderate LED tape lengths appropriate for individual panel fixtures. The strain-relief is useful where the cable is routed through metalwork with sharp edges.
Can the XLC-40-24-S be used in a 24V LED light strip installation in a museum or gallery?
Yes, the XLC-40-24-S is appropriate for gallery or museum lighting applications that use 24V LED strip for accent or object lighting. The flicker-free characteristic is especially important in museums, where light flicker can interfere with visitor perception and camera equipment. At 40.8W it can support runs of 24V LED strip up to approximately 2.83 m for 14.4 W/m tape (40.8 ÷ 14.4 ≈ 2.83 m).
How much 24V LED strip can the XLC-40-24-S support?
The XLC-40-24-S delivers 40.8W at 24V and 1.7A. To size your strip run, divide 40.8W by the strip's rated watts per meter: a 14.4 W/m strip gives approximately 2.83 m; a 9.6 W/m strip about 4.25 m. Check your specific strip's rated power per meter and load no more than 80% of the driver's rated output for safe continuous operation.
Is the XLC-40-24-S rated for outdoor or damp-location use?
The XLC-40-24-S does not have a listed IP ingress protection rating, so it is not suitable for direct outdoor exposure or damp locations without a protective enclosure. It should be installed inside a dry, enclosed housing. For direct outdoor driver mounting, a product with IP65 or higher protection would be required.
What is the warranty on the XLC-40-24-S, and what certifications does it carry?
The XLC-40-24-S carries a 5-year warranty and is certified to CB, CCC, CE, EAC, ENEC, and c_SELV standards. The ENEC and CE marks confirm compliance with European luminaire driver safety requirements, and the c_SELV designation confirms the 24V output is classified as a safety extra-low voltage circuit. The 5-year warranty is consistent across the XLC series.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other XLC-40 Models
17 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
