Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well APC-16-350 Power Supply 16W 350mA
Overview
APC-16-350 is the model of this series: rated current 350mA, rated power 16.8W, typical efficiency 84%.
Features
- Constant current mode design
- Universal AC input / Full range
- Protections:Short circuit / Over voltage
- Fully isolated plastic case
- Small and compact size
- Cooling by free air convection
- Class Ⅱ power unit, no FG
- Class 2 power unit
- Pass LPS
- IP42 design
- Display devices for decorative & advertising accessories (Note.5)
- 100% full load burn-in test
- Low cost / High reliability
- 2 years warranty
Specifications
OUTPUT
- RATED CURRENT
- 350mA
- DC VOLTAGE RANGE
- 12~48V
- RATED POWER
- 16.8W
- VOLTAGE TOLERANCENote.2
- ±5.0%
- CURRENT ACCURACY
- ±8.0%
- SETUP, RISE TIME
- 3000ms, 200ms / 230VAC 3000ms, 200ms / 115VAC at full load
- HOLD UP TIME (Typ.)
- 20ms/230VAC 12ms/115VAC at full load
INPUT
- VOLTAGE RANGENote.3
- 90 ~ 264VAC 127 ~ 370VDC
- FREQUENCY RANGE
- 47 ~ 63Hz
- EFFICIENCY(Typ.)
- 84%
- AC CURRENT
- 0.3A/230VAC;0.5A/115VAC
- INRUSH CURRENT(Typ.)
- COLD START 45A(twidth=210μs measured at 50% Ipeak) at 230VAC
- MAX. No. of PSUs on 16A CIRCUIT BREAKER
- 13 units (circuit breaker of type B) / 23 units (circuit breaker of type C) at 230VAC
- LEAKAGE CURRENT
- 0.25mA / 240VAC
PROTECTION
- OVER VOLTAGE
- 50.4~ 60V Protection type : Shut off o/p voltage, clamping by zener diode
ENVIRONMENT
- WORKING TEMP.
- -30 ~ 70℃(Refer to "Derating Curve")
- WORKING HUMIDITY
- 20 ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -40 ~ +80℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.2%/℃ (0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC (Note 5)
- SAFETY STANDARDSNote.6
- UL8750,CSA C22.2 No.250.0-08, BIS IS15885, EAC TP TC 004,BS EN/EN 62368-1 approved
- WITHSTAND VOLTAGE
- I/P-O/P:3.75KVAC
- ISOLATION RESISTANCE
- I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
- Compliance to BS EN/EN55032,BS EN/EN61000-3-2,BS EN/EN61000-3-3, EAC TP TC 020
- EMC IMMUNITY
- Compliance to BS EN/EN55035,BS EN/EN61000-4-2,3,4,5,6,8,11; light industry level(surge 2KV), EAC TP TC 020
OTHERS
- MTBF
- 6411.4K hrs min. Telcordia SR-332 (Bellcore) ; 1092.9K hrs min. MIL-HDBK-217F (25℃)
- DIMENSION
- 77*40*29(L*W*H)
- PACKING
- 0.1Kg; 120pcs/14Kg/1.06CUFT
Certifications & ratings
- LPS
- IP42
- IS 15885(Part 2/Sec13)
- R-41027766
Test conditions and notes7
- 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
- 2. Tolerance : includes set up tolerance.
- 3. Derating may be needed under low input voltage. Please check the static characteristic for more details.Please connect L line to the positive pole and N line to the negative pole under DC input.
- 4. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
- 5. This product is not intended for LED lighting luminaire applications in the EU and China.(In the EU and China the LPF/NPF/XLG/XLC/XLN series are recommended.)
- 6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
- 7. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
Technical drawings
Downloads
FAQ
What is the APC-16-350 typically used for?
The Mean Well APC-16-350 is typically used as a constant-current driver for LED loads that need a 350mA drive current. With 16.8W rated power and a 12-48V output voltage range, it suits 350mA LED strings across a wide range of forward voltages. Note that the datasheet states it is not intended for LED lighting luminaire applications in the EU and China.
Is the APC-16-350 a good fit for 350mA LED loads that need more headroom than the APC-12-350?
The APC-12-350 is not covered by this datasheet, so check its own specifications for a direct comparison. The APC-16-350 delivers a rated 350mA over a 12-48V output range with 16.8W rated power, so it fits 350mA LED loads that need up to that voltage and power.
Can the APC-16-350 be used for indoor LED lighting or sign projects?
Yes. The APC-16-350 is suitable for indoor LED lighting and sign assemblies that are designed for 350mA constant-current operation and fit within the driver's 12-48V, 16.8W rating. It is approved to UL8750, among other safety standards, but the datasheet notes it is not intended for LED lighting luminaire applications in the EU and China.
Will the APC-16-350 run on common AC mains supplies?
Yes. The specified input range is 90-264VAC (47-63Hz), so the APC-16-350 can operate from common 120V and 240V mains systems within that range. That helps standardize the same driver across a variety of installation environments.
Is the APC-16-350 suitable for exposed outdoor installation?
No. The APC-16-350 is rated IP42, which means it should generally be used indoors or inside a protective enclosure rather than in direct outdoor exposure. Its listed working temperature is -30°C to +70°C (refer to the derating curve), but ingress protection remains limited.
How does the APC-16-350 compare with APC-12-350 and APC-12-700?
The APC-16-350 provides 16.8W at 350mA over a 12-48V output range. The APC-12-350 and APC-12-700 are not covered by this datasheet, so check their own specifications; within the APC-16 series, the APC-16-700 offers the same 16.8W at 700mA over 9-24V. Matching the driver current to the LED requirement is the key selection rule.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other APC-16 Models
1 other model| Model | Power | Voltage | Current | IP Rating | Price | |
|---|---|---|---|---|---|---|
| Mean Well APC-16-700 Power Supply 16W 700mA | 16.8W | 24V | 0.7A | IP42 | $7.60 | View |
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
