Mean Well HLG-185H-15 Power Supply 172.5W 15V

Name: Mean Well HLG-185H-15 Power Supply 172.5W 15V 11.5A
Brand: Mean Well
SKU: HLG-185H-15
Price: 56.95 USD
Availability: InStock
Rating: 5.0 (4 reviews)

Overview

HLG-185H-15 is the 15V output model of this series: rated current 11.5A, rated power 172.5W, typical efficiency 92%. Type Blank: Io and Vo fixed (IP67).

HLG-185H series is a 185W AC/DC LED driver featuring the dual mode constant voltage and constant current output. HLG-185H operates from 90～305VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 94%, with the fanless design, the entire series is able to operate for -40℃ ~ +90℃ case temperature under free air convection. The design of metal housing and IP67 ingress protection level allows this series to fit both indoor and outdoor applications.

Features

Constant Voltage + Constant Current mode output
Metal housing with class I design
IP67 rating for indoor or outdoor installations
Typical lifetime > 62000 hours
7 years warranty

Specifications

HLG-185H-15Specifications from the official datasheet (2026-07-24 edition)

OUTPUT

DC VOLTAGE: 15V
CONSTANT CURRENT REGION^Note.4: 7.5 ~ 15V
RATED CURRENT: 11.5A
RATED POWER: 172.5W
RIPPLE & NOISE (max.)^Note.2: 150mVp-p
VOLTAGE TOLERANCE^Note.3: ±2.0%
LINE REGULATION: ±0.5%
LOAD REGULATION: ±1.5%
SETUP, RISE TIME^Note.6: 1000ms,200ms/115VAC 500ms,200ms/230VAC
HOLD UP TIME (Typ.): 16ms / 115VAC, 230VAC

INPUT

VOLTAGE RANGE^Note.5: 90 ~ 305VAC 127 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section)
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR (Typ.): PF≧0.98/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC @ full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
TOTAL HARMONIC DISTORTION: THD< 20% (@ load≧50% / 115VAC,230VAC; @ load≧75% / 277VAC) (Please refer to " TOTAL HARMONIC DISTORTION (THD) " section)
EFFICIENCY (Typ.): 92%
AC CURRENT (Typ.) 12V: 1.8A / 115VAC 0.8A / 230VAC 0.7A / 277VAC
AC CURRENT (Typ.) 15V ~ 54V: 2.1A / 115VAC 0.9A / 230VAC 0.8A / 277VAC
INRUSH CURRENT (Typ.): COLD START 65A(twidth=445μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER: 4 units (circuit breaker of type B) / 7 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT: <0.75mA / 277VAC

PROTECTION

OVER CURRENT: 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT: Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE: 18 ~ 21V Shut down o/p voltage with auto-recovery or re-power on to recovery
OVER TEMPERATURE^Note.9: Shut down o/p voltage, recovers automatically after temperature goes down

ENVIRONMENT

WORKING TEMP.: Tcase= -40 ~ +90℃ (Please refer to "OUTPUT LOAD vs TEMPERATURE" section)
MAX. CASE TEMP.: Tcase= +90℃
WORKING HUMIDITY: 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03%/℃ (0 ~ 60℃)
VIBRATION: 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: UL8750(type”HL”),CSA C22.2 No. 250.0-08; BS EN/EN 61347-1, BS EN/EN 61347-2-13，AS/NZS 61347-1, AS/NZS 61347-2-13 independent;GB/T19510.1,GB/T19510.213 (except for D-type) ; IP65 or IP67; J61347-1, J61347-2-13(except for D-type) , EAC TP TC 004, KC61347-1,KC61347-2-13 (except for D-type) approved
WITHSTAND VOLTAGE: I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
ISOLATION RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Compliance to BS EN/EN55015, BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2 Class C (@ load≧50%) ; BS EN/EN61000-3-3,GB/T 17743 , GB17625.1(except for D-type) ,EAC TP TC 020, KSC 9815(except for D-type)
EMC IMMUNITY: Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, BS EN/EN55024, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV),EAC TP TC 020, KSC 9547(except for D-type)

OTHERS

MTBF: 2184.8K hrs min. Telcordia SR-332 (Bellcore) ; 197.3K hrs min. MIL-HDBK-217F (25℃)
DIMENSION: 228*68*38.8mm (L*W*H)
PACKING: 1.15Kg; 12pcs/14.8Kg/0.8CUFT

Certifications & ratings

Type: HL

MODEL ENCODING

Blank (this model): Io and Vo fixed; IP67
A: Io and Vo adjustable through built-in potentiometer; IP65
B: 3 in 1 dimming function (1~10VDC, 10V PWM signal and resistance); IP67
AB: Io and Vo adjustable through built-in potentiometer & 3 in 1 dimming function (1~10Vdc, 10V PWM signal and resistance); IP65
D: Timer dimming function, contact MEAN WELL for details(safety pending); IP67

Test conditions and notes14

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Please refer to "DRIVING METHODS OF LED MODULE".
5. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
7. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
8. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains.
9. For OTP which triggered at light load/no load condition, proceed AC repower on to recovery.
10. This series meets the typical life expectancy of >62,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75℃ or less.
11. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com.
12. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
13. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
15. Products sourced from the Americas regions may only have the UL, CE and UKCA logos. Please contact your MEAN WELL sales for more information.

Technical drawings

HLG-185H-15 BLOCK DIAGRAM — BLOCK DIAGRAM

HLG-185H-15 Illustration (page 5) — Illustration (page 5)

HLG-185H-15 STATIC CHARACTERISTICS — STATIC CHARACTERISTICS

HLG-185H-15 TOTAL HARMONIC DISTORTION — TOTAL HARMONIC DISTORTION

HLG-185H-15 MECHANICAL SPECIFICATION ※Blank/D-Type — MECHANICAL SPECIFICATION ※Blank/D-Type

HLG-185H-15 Dimensions (mm) — Dimensions (mm)

HLG-185H-15 WATERPROOF CONNECTION — WATERPROOF CONNECTION

Typical applications

LED street lighting
LED high-bay lighting
Parking space lighting
LED fishing lamp
LED greenhouse lighting
Type “HL” for use in ClassⅠ, Division 2 hazardous (Classified) location.

Downloads

Datasheet1

HLG-185H-15 datasheetHLG-185H-SPEC.PDF · 2026-07-24 edition PDF Download

Certificates5

UL Certificate (HLG-185H)(EN) PDF Download

TUV Certificate (HLG-185H)(EN) PDF Download

EMC Certificate (HLG-185H)(EN) PDF Download

PSE Certificate (HLG-185H)(EN) PDF Download

CCC Certificate(HLG-185H)(EN) PDF Download

Catalogues1

Mean Well LED Driver Catalog PDF Download

FAQ

Can I use the HLG-185H-15 to power 15V LED strip lighting outdoors?

Yes. The HLG-185H-15 outputs 15V at up to 11.5A (172.5W), and its metal housing with IP65/IP67 ingress protection is designed for both indoor and outdoor applications. Its -40°C to +90°C case temperature range (with derating at higher temperatures) handles harsh weather conditions.

Is the HLG-185H-15 powerful enough for large-scale 15V LED signage?

Yes. At 172.5W and 15V output, the HLG-185H-15 provides substantial power for channel-letter signs, light boxes, or cabinet signs using 15V LED modules. Its wide 90-305VAC input accommodates varying mains supplies, and the IP65/IP67-rated housing suits outdoor sign enclosures.

Can the HLG-185H-15 drive 15V LED flood or wash lighting for building facades?

Yes, provided the total LED load stays within 172.5W. The constant-current operation with a CC voltage range of 7.5-15V ensures stable output for architectural wash lights. The IP65/IP67 ingress protection and -40°C to +90°C case temperature range make it well suited for permanent outdoor facade installations.

How many meters of 15V LED strip can the HLG-185H-15 power?

Divide 172.5W by your strip's power consumption per meter. For example, a strip rated at 12W/m would allow about 14.4 meters (172.5W / 12W per meter = 14.375m). Always check your strip's rated power per meter and keep total load at or below 172.5W.

Can the HLG-185H-15 be mounted in an outdoor junction box exposed to rain?

Yes. The HLG-185H series has a metal housing with IP65/IP67 ingress protection that the datasheet says suits outdoor applications, and waterproof M12/M15 connectors are available for the output cable in wet locations. Follow MEAN WELL's IP installation cautions in the user manual. The case temperature range is -40°C to +90°C.

What are the differences between the HLG-185H-15, 15A, 15AB, and 15B variants?

All four share the same 172.5W / 15V / 11.5A core specs and 228 x 68 x 38.8 mm housing. The base HLG-185H-15 has fixed output. The -15A adds output voltage/current adjustment via built-in potentiometer. The -15AB adds both adjustment and 3-in-1 (1-10V/PWM/resistance) dimming input. The -15B adds dimming input only, without the potentiometers.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating	Price
Mean Well HLG-185H-24A Power Supply 185W 24V - Adjustable 7.8A	187.2W	24V	7.8A	IP65	$44.14	View
Mean Well HLG-185H-24 Power Supply 185W 24V 7.8A	187.2W	24V	7.8A	IP67	$58.71	View

Customer reviews

5.0 Reviews verified for authenticity

5 ★ (4)

4 ★ (0)

3 ★ (0)

2 ★ (0)

1 ★ (0)

Reviewed by 4 customers across the HLG series

By Penny C.|2026-10-03✓ Verified Buyer
Model: HLG-480H-24AQuantity: 2
It is a beast!
By T-Rids |2026-09-14✓ Verified Buyer
Model: HLG-480H-24BQuantity: 1
Very good product
By Maxim|2026-08-25✓ Verified Buyer
Model: HLG-320H-24B ×1, HLG-320H-24B ×1Quantity: 1
Excellent product!
By J. Vega|2026-07-20✓ Verified Buyer
Model: HLG-185H-30Quantity: 1
Exactly what I needed to revive my dead Maytronics Dolphin power supply!

Please log in to write a review.

Mean Well HLG-185H-15 Power Supply 172.5W 15V 11.5A

Select model — 16 in this family