Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well LPP-100-15 Power Supply 100W 15V 6.7A
Overview
LPP-100-15 is the 15V output model of this series: rated current 6.7A, rated power 100.5W, typical efficiency 80%.
Features
- Universal AC input / Full range
- Built-in active PFC function
- Protections: Short circuit / Overload / Over voltage
- Cooling by free air convection
- 100% full load burn-in test
- Fixed switching frequency at PFC:67KHz PWM:134KHz
- 3 years warranty
Specifications
OUTPUT
- DC VOLTAGE
- 15V
- RATED CURRENT
- 6.7A
- CURRENT RANGE
- 0 ~ 6.7A
- RATED POWER
- 100.5W
- RIPPLE & NOISE (max.)Note.2
- 100mVp-p
- VOLTAGE ADJ. RANGE
- 14.3 ~ 16.5V
- VOLTAGE TOLERANCENote.3
- ±2.0%
- LINE REGULATION
- ±0.5%
- LOAD REGULATION
- ±0.5%
- SETUP, RISE TIME
- 600ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load
- HOLD UP TIME (Typ.)
- 28ms/230VAC 28ms/115VAC at full load
INPUT
- VOLTAGE RANGENote.5
- 85 ~ 264VAC 120 ~ 370VDC
- FREQUENCY RANGE
- 47 ~ 63Hz
- POWER FACTOR (Typ.)
- PF>0.95/230VAC PF>0.98/115VAC at full load
- EFFICIENCY(Typ.)
- 80%
- AC CURRENT (Typ.)
- 1.7A/115VAC 0.75A/230VAC
- INRUSH CURRENT (Typ.)
- COLD START 30A/230VAC
- LEAKAGE CURRENT
- <2mA / 240VAC
PROTECTION
- OVERLOAD
- 105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed
- OVER VOLTAGE
- 17.25 ~ 20.25V Protection type : Shut down o/p voltage, re-power on to recover
ENVIRONMENT
- WORKING TEMP.
- -10 ~ +60℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20 ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -20 ~ +85℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.05%/℃ (0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC (Note 4)
- SAFETY STANDARDS
- UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved
- WITHSTAND VOLTAGE
- I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
- ISOLATION RESISTANCE
- I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
- Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020
- EMC IMMUNITY
- Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, light industry level, EAC TP TC 020
OTHERS
- MTBF
- 2586.7K hrs min. Telcordia SR-332 (Bellcore) ; 287.9K hrs min. MIL-HDBK-217F (25℃)
- DIMENSION
- 222*62*33.6mm (L*W*H)
- PACKING
- 0.51Kg; 24pcs/13.9Kg/1.63CUFT
Test conditions and notes6
- 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
- 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μF & 47μF parallel capacitor.
- 3. Tolerance : includes set up tolerance, line regulation and load regulation.
- 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )
- 5. Derating may be needed under low input voltages. Please check the derating curve for more details.
- 6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
Technical drawings
Downloads
Datasheet1
Certificates4
Test reports1
Catalogues1
FAQ
Can I use the LPP-100-15 for 15V industrial instruments or automation electronics?
It can fit 15V industrial electronics that require constant-voltage DC and draw no more than 100.5W or 6.7A. That makes it relevant for instruments, controllers, and other 15V loads where a fixed DC bus is required. The broad 85-264VAC input also helps when equipment may be deployed across different AC supply standards.
Is the LPP-100-15 suitable for embedded devices that need a regulated 15V power source?
Yes, provided the device is specified for 15V constant-voltage input and the full load stays within 100.5W and 6.7A. This model is not a constant-current driver, so it is meant for equipment expecting a fixed 15V DC supply. Its compact 222.0 x 62.0 x 33.6 mm package can be useful in space-constrained embedded builds.
Can the LPP-100-15 be used for 15V lab fixtures, OEM assemblies, or panel sub-systems?
It is suitable for those types of 15V DC applications when the total demand remains within the unit's 100.5W and 6.7A output ratings. The small and compact design and 0.51 kg weight can make integration easier in OEM or bench assemblies. Buyers should confirm the load expects constant-voltage 15V operation.
How does the LPP-100-15 differ from the other listed LPP outputs and power levels?
The LPP-100 family options listed are 3.3V 20A 66W, 5V 20A 100W, 7.5V 13.5A 101.25W, 12V 8.5A 102W, 13.5V 7.5A 101.25W, 15V 6.7A 100.5W, 24V 4.2A 100.8W, 27V 3.8A 102.6W, and 48V 2.1A 100.8W. All share the 85-264VAC input with active PFC, the 222 x 62 x 33.6 mm size and the same short circuit, overload and over voltage protections; the main differences are output voltage, current, power and efficiency. LPP-150 ratings are not covered by the LPP-100 spec sheet.
Is the LPP-100-15 rated for outdoor conditions or only for protected environments?
From the specs provided, the environmental data given is -10C to +60C operating temperature. No IP rating is included in this product data, so the provided specifications do not document protection against water or dust exposure. On that basis, it should be treated as a supply for protected installations unless separate enclosure protection is provided.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other LPP-100 Models
8 other models| Model | Power | Voltage | Current | IP Rating | Price | |
|---|---|---|---|---|---|---|
| Mean Well LPP-100-12 Power Supply 102W 12V 8.5A | 102W | 12V | 8.5A | IP20 | $37.22 | View |
| Mean Well LPP-100-7.5 Power Supply 101W 7.5V 13.5A | 101.25W | 7.5V | 13.5A | IP20 | $37.12 | View |
| Mean Well LPP-100-5 Power Supply 100W 5V 20A | 100W | 5V | 20A | IP20 | $37.12 | View |
| Mean Well LPP-100-48 Power Supply 100W 48V 2.1A | 100.8W | 48V | 2.1A | IP20 | $37.12 | View |
| Mean Well LPP-100-3.3 Power Supply 66W 3.3V 20A | 66W | 3.3V | 20A | IP20 | $37.12 | View |
| Mean Well LPP-100-27 Power Supply 102W 27V 3.8A | 102.6W | 27V | 3.8A | IP20 | $37.12 | View |
| Mean Well LPP-100-24 Power Supply 100W 24V 4.2A | 100.8W | 24V | 4.2A | IP20 | $37.22 | View |
| Mean Well LPP-100-13.5 Power Supply 101W 13.5V 7.5A | 101.25W | 13.5V | 7.5A | IP20 | $37.12 | View |
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
