Mean Well NPF-60D-24 Power Supply 60W 24V

Name: Mean Well NPF-60D-24 Power Supply 60W 24V - Dimmable 2.5A
Brand: Mean Well
SKU: NPF-60D-24
Price: 30.83 USD
Availability: InStock

Overview

NPF-60D-24 is the model of this series: rated current 2.5A, rated power 60W, typical efficiency 89%.

NPF-60D series is a 60W AC/DC LED driver featuring the constant current mode output. NPF-60D operates from 90~305VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 90%, with the fanless design, the entire series is able to operate for -40℃~+85℃ case temperature under free air convection. The entire series is rated with IP67 ingress protection level and is suitable to work for a variety of applications at dry, damp or wet locations. NPF-60D is equipped with the 3 in 1 dimming function so as to provide the design flexibility for LED lighting system.

Features

Plastic housing with class II design
Built-in active PFC function
Class 2 power unit
Standby power consumption <0.5W
IP67 rating for indoor or outdoor installations
Function: 3 in 1 dimming (dim-to-off)
Typical lifettime >50000hours
5 years warranty

Specifications

NPF-60D-24Specifications from the official datasheet (2026-02-09 edition)

OUTPUT

RATED CURRENT: 2.5A
RATED POWER: 60W
CONSTANT CURRENT REGION: 14.4 ~ 24V
CURRENT RIPPLE: 5.0% max. @rated current
CURRENT TOLERANCE: ±5.0%
SET UP TIME^Note.3: 500ms/115VAC, 230VAC

INPUT

VOLTAGE RANGE^Note.2: 90 ~ 305VAC 127 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section)
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR (Typ.): PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
TOTAL HARMONIC DISTORTION: THD< 20%(@load≧60%/115VC, 230VAC; @load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
EFFICIENCY(Typ.): 89%
AC CURRENT (Typ.): 0.8A / 115VAC 0.4A / 230VAC 0.32A / 277VAC
INRUSH CURRENT(Typ.): COLD START 50A(twidth=270μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. NO. of PSUs on 16A CIRCUIT BREAKER: 9 units (circuit breaker of type B) / 16 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT: <0.25mA / 277VAC
STANDBY POWER CONSUMPTION: <0.5W

PROTECTION

OVER CURRENT: 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT: Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE: 28 ~ 34V Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE: Shut down o/p voltage, re-power on to recover

ENVIRONMENT

WORKING TEMP.: Tcase=-40 ~ +85℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.: Tcase=+85℃
WORKING HUMIDITY: 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03%/℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: UL8750(type”HL”), UL879(for 12V,24V only), CSA C22.2 No. 250.13-12, ENEC BS EN/EN61347-1, BS EN/EN61347-2-13, BS EN/EN62384 independent, EAC TP TC 004,GB/T19510.1,GB/T19510.213, IP67 approved ; Design refer to BS EN/EN60335-1
WITHSTAND VOLTAGE: I/P-O/P:3.75KVAC
ISOLATION RESISTANCE: I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@ load≧60%) ; BS EN/EN61000-3-3; GB/T 17743, GB17625.1,EAC TP TC 020
EMC IMMUNITY: Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level(surge immunity Line-Line 2KV); EAC TP TC 020

OTHERS

MTBF: 3082.1K hrs min. Telcordia SR-332 (Bellcore) ; 287.9K hrs min. MIL-HDBK-217F (25℃)
DIMENSION: 150*53*35mm (L*W*H)
PACKING: 0.49Kg;30pcs/15.7Kg/1.0CUFT

Certifications & ratings

IP level: IP67

Test conditions and notes9

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
2. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
3. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
4. The standby power consumption is specified for 230VAC.
5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
6. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75℃ or less.
7. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com
8. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
9. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf

Technical drawings

NPF-60D-24 BLOCK DIAGRAM — BLOCK DIAGRAM

NPF-60D-24 DIMMING OPERATION — DIMMING OPERATION

NPF-60D-24 OUTPUT LOAD vs TEMPERATURE — OUTPUT LOAD vs TEMPERATURE

NPF-60D-24 STATIC CHARACTERISTIC — STATIC CHARACTERISTIC

NPF-60D-24 TOTAL HARMONIC DISTORTION — TOTAL HARMONIC DISTORTION

NPF-60D-24 MECHANICAL SPECIFICATION — MECHANICAL SPECIFICATION

NPF-60D-24 Recommend Mounting Direction — Recommend Mounting Direction

Typical applications

LED panel lighting
LED downlight
LED decorative lighting
LED tunnel lighting
Moving sign
Type "HL" for use in Class I, Division 2 hazardous (Classified) location

Downloads

Certificates6

UL Certificate (NPF-60D)(EN) PDF Download

CB Certificate (NPF-60D)(EN) PDF Download

EMC Certificate (NPF-60D)(EN) PDF Download

ENEC Certificate (NPF-60D)(EN) PDF Download

ErP Certificate(NPF-60D)(EN) PDF Download

CCC Certificate(NPF-60D)(CN) PDF Download

Catalogues1

Mean Well LED Driver Catalog PDF Download

FAQ

What dimming methods are built into the NPF-60D-24?

The NPF-60D-24 supports built-in 3-in-1 dimming: 0–10VDC, 10V PWM signal and resistance control between DIM+ and DIM- are all natively supported without any add-on dimming module.

Can the NPF-60D-24 be used to drive dimmable 24V LED strips in a commercial museum display?

The NPF-60D-24 is a constant-current driver delivering 2.5A over a 14.4–24V region (60W), so it suits LED loads designed for 2.5A constant-current drive rather than constant-voltage 24V strips. Its built-in dimming suits museum or gallery displays where adjustable light levels are essential.

Is the NPF-60D-24 suitable for outdoor use without a separate waterproof box?

Yes. The NPF-60D-24 is IP67 approved, so it is protected against dust and temporary water immersion, and is rated for a working case temperature (Tcase) of -40°C to +85°C. Follow the IP waterproof installation cautions in MEAN WELL's user manual.

What certifications does the NPF-60D-24 carry?

The NPF-60D-24 is listed to UL8750 (type HL), UL879 (12V and 24V models only), CSA C22.2 No. 250.13-12, ENEC EN61347-1/EN61347-2-13, EN62384, EAC TP TC 004 and GB/T19510, and is IP67 approved. For warranty terms, see MEAN WELL's website.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating	Price
Mean Well NPF-60D-54 Power Supply 60W 54V - Dimmable 1.12A	60.48W	54V	1.12A	IP67	$30.83	View
Mean Well NPF-60D-48 Power Supply 60W 48V - Dimmable 1.25A	60W	48V	1.25A	IP67	$28.70	View
Mean Well NPF-60D-42 Power Supply 60W 42V - Dimmable 1.43A	60.06W	42V	1.43A	IP67	$30.83	View
Mean Well NPF-60D-36 Power Supply 60W 36V - Dimmable 1.67A	60.12W	36V	1.67A	IP67	$32.74	View
Mean Well NPF-60D-30 Power Supply 60W 30V - Dimmable 2A	60W	30V	2A	IP67	$30.83	View
Mean Well NPF-60D-20 Power Supply 60W 20V - Dimmable 3A	60W	20V	3A	IP67	$32.74	View
Mean Well NPF-60D-15 Power Supply 60W 15V - Dimmable 4A	60W	15V	4A	IP67	$32.74	View
Mean Well NPF-60D-12 Power Supply 60W 12V - Dimmable 5A	60W	12V	5A	IP67	$30.83	View

Please log in to write a review.

Mean Well NPF-60D-24 Power Supply 60W 24V - Dimmable 2.5A

Select model — 10 in this family