Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
OWA-200E-42 is the 42V output model of this series: rated current 4.75A, rated power 199W, typical efficiency 94%.
OWA-200E is a 200W AC/DC, class Ⅱ (no FG) external power supply series pinpointing the moistureproof feature. The fully-potted silicone inside the plastic enclosure enhances the heat dissipation; it also benefits that the power body of OWA-200E achieves IP67 level so that this series specializes the application in which the damp, humidity or dust resistance is needed for the external power supply. OWA-200E follows the latest energy efficiency demand with the no load power consumption less than 0.15W. It is certified with EN61558-2-16; moreover, the compliance to EN60335-1 for selected models can greatly simplify the system design such as household or charging application. OWA-200E adopts the input range from 180VAC to 264VAC and incorporates a built-in PFC function. With the working efficiency up to 94%, OWA-200E is cooled by free air convection; the working temperature range from -40℃ to +70℃.
Features
- Input range 180~264VAC
- Class Ⅱ power unit, no FG
- Built-in active PFC function
- High efficiency up to 94%
- No load power consumption <0.15W
- Energy efficiency Level Ⅵ
- Comply with EU ErP and CoC Version 5
- Compliance to IEC/EN 61558-1,-2-16 and IEC/EN 60335-1 (except for OWA-200E-48,54) for household application
- Fanless design, cooling by free air convection
- Protections: Short circuit / Overload / Over voltage / Over temperature
- 5 years warranty
- Various DC plug quick adapter accessory available (Plug kit sold seperately, please refer to : https://www.meanwell.com/upload/pdf/DC_plug.pdf)
Specifications
OUTPUT
- DC VOLTAGE
- 42V
- RATED CURRENT
- 4.75A
- RATED POWER
- 199W
- RIPPLE & NOISE (max.)Note.2
- 250mVp-p
- VOLTAGE TOLERANCENote.3
- ±3.0%
- LINE REGULATION
- ±0.5%
- LOAD REGULATION
- ±3.0%
- SETUP, RISE TIMENote.4
- 500ms, 80ms 230VAC
- HOLD UP TIME (Typ.)
- 10ms at full load 230VAC
INPUT
- VOLTAGE RANGE
- 180 ~ 264VAC 254 ~ 370VDC
- FREQUENCY RANGE
- 47 ~ 63Hz
- POWER FACTOR (Typ.)
- PF>0.96/230VAC at full load
- EFFICIENCY(Typ.)
- 94%
- AC CURRENT (Typ.)
- 1.1A / 230VAC
- INRUSH CURRENT (Typ.)
- COLD START 65A(twidth=550μs measured at 50% Ipeak) at 230VAC
- LEAKAGE CURRENT
- <0.25mA / 240VAC
- NO LOAD CONSUMPTION
- <0.15W
PROTECTION
- OVER CURRENT
- 105% ~ 150% Protection type : Hiccup mode, recovers automatically after fault condition is removed
- SHORT CIRCUIT
- Hiccup mode, recovers automatically after fault condition is removed
- OVER VOLTAGE
- 46 ~ 57V Protection type : Shut down o/p voltage, re-power on to recover
- OVER TEMPERATURE
- Shut down o/p voltage, re-power on to recover
ENVIRONMENT
- WORKING TEMP.
- -40 ~ +70℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20 ~ 95% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -40 ~ +80℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03%/℃ (0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC
- SAFETY STANDARDS
- DEKRA EN61558-1,-2-16; DEKRA EN60335-1(except for OWA-200E-48,54); EAC TP TC 004, IP67 (for power body) approved
- WITHSTAND VOLTAGE
- I/P-O/P:4.2KVAC
- ISOLATION RESISTANCE
- I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSION
- Compliance to EN55032(CISPR32)ClassB, EN55035, EN55014-1, EN61000-3-2/3; EAC TP TC 020
- EMC IMMUNITY
- Compliance to EN61000-4-2,3,4,5,6,8,11,EN55014-2,EN55024, light industry level (surge L-N: 2KV), EAC TP TC 020
OTHERS
- MTBF
- 2677.8K hrs min. Telcordia SR-332 (Bellcore) 267.6K hrs min. MIL-HDBK-217F (25℃)
- DIMENSION
- 195*68*39.5mm
- PACKING
- 1.32Kg; 9pcs/ 12.88Kg/ 0.79CUFT
Test conditions and notes5
- 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
- 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
- 3. Tolerance : includes set up tolerance, line regulation and load regulation.
- 4. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
- 5. For battery charging purpose had better operation with a BMS controller.
Technical drawings
Typical applications
- Industrial field PC adaptor
- POS or KIOSK system
- Portable Battery charger
- Electric Lown mowe charger
- General electronic products in dusty or humid environment
- Household Device
Downloads
Datasheet1
Certificates5
Test reports1
FAQ
Can I use the OWA-200E-42 for a 42V industrial control or automation device?
Yes, if the equipment requires a constant 42V DC supply and draws no more than 4.75A. This model is rated for 199W output, so it fits higher-power 42V automation loads that stay within that current limit.
Is this power supply suitable for 42V embedded or OEM equipment in a compact enclosure?
It can be a fit where the system needs 42V constant voltage and up to 199W in a box-style form factor. The housing measures 195 x 68 x 39.5 mm, so check that the enclosure has room for it.
Can this unit power a 42V device used in IT or network edge equipment cabinets?
Yes, for 42V DC equipment that stays within 4.75A output current. Its 180-264VAC input range also matches installations using that AC input window.
Would this work for a 42V DC load in an industrial machine that runs continuously in hot areas?
It is designed for demanding environments, with an operating range of -40 degrees C to +70 degrees C, but output must be derated at higher ambient temperatures according to the derating curve. As long as the load needs constant 42V and stays within the derated limits of 199W and 4.75A, it is suited to that type of application.
Is the OWA-200E-42 suitable for outdoor or washdown environments?
Its power body is rated IP67, so it is designed for waterproof and dust-tight service. Combined with its -40 degrees C to +70 degrees C operating temperature range (with derating), that makes it appropriate for indoor or outdoor use where a 42V, 199W supply is needed.
How does the OWA-200E-42 compare with other OWA-200E models?
Within the OWA-200E range, the listed models are 12V 180W 15A, 20V 200W 10A, 24V 199W 8.3A, 36V 199W 5.55A, 42V 199W 4.75A, 48V 200W 4.17A, and 54V 200W 3.71A. The OWA-200E-42 sits in the middle of that group, providing 42V output at 199W within the 200W series.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other OWA-200E Models
6 other models| Model | Power | Voltage | Current | IP Rating | Price | |
|---|---|---|---|---|---|---|
| Mean Well OWA-200E-54 Power Supply Moistureproof 200W 54V 3.71A | 200W | 54V | 3.71A | IP67 | $64.73 | View |
| Mean Well OWA-200E-48 Power Supply Moistureproof 200W 48V 4.17A | 200W | 48V | 4.17A | IP67 | $64.73 | View |
| Mean Well OWA-200E-36 Power Supply Moistureproof 200W 36V 5.55A | 199W | 36V | 5.55A | IP67 | $64.73 | View |
| Mean Well OWA-200E-24 Power Supply Moistureproof 200W 24V 8.3A | 199W | 24V | 8.3A | IP67 | $64.73 | View |
| Mean Well OWA-200E-20 Power Supply Moistureproof 200W 20V 10A | 200W | 20V | 10A | IP67 | $64.73 | View |
| Mean Well OWA-200E-12 Power Supply Moistureproof 180W 12V 15A | 180W | 12V | 15A | IP67 | $64.73 | View |
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.






