Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well DKM10A-05 DC-DC Converter - 10W - 9~18V in ±5V out
SKM10 and DKM10 series are 10W isolated and regulated module type DC-DC converter with DIP 1"x1" package. It features international standard pins, a high efficiency up to 90%, wide working temperature range -40~+85℃, 1.5KVDC I/P-O/P isolation voltage, Compliance to EN55032 radiated Class A without additional components, continuous-mode short circuit protection, etc. The models account for different input voltage 4.7~9V, 9~18V, 18~36V and 36~75V 2:1 wide input range, and various output voltage, 3.3V/5V/12V/15V for single output and ±5V/±12V/±15V for dual outputs, which are suitable for all kinds of systems, such as industrial control, telecommunication field, distributed power architecture, and so on.
Key Features
- ✓✓✓DIP 1"x1" package with industry standard pinout
- ✓✓✓2:1 wide input range
- ✓✓✓Operating temperature range -40 ~ +85℃
- ✓✓✓No minimum load required
- ✓✓✓Comply to EN55032 radiated Class A without additional components
- ✓✓✓High efficiency up to 90%
- ✓✓✓Protections: Short circuit (Continuous} / Overload / Over voltage / Input under voltage
- ✓✓✓1.5KVDC I/O isolation
- ✓✓✓Remote ON/OFF control and Triming output (±10%)
- ✓✓✓3 years warranty
-
BrandMean Well
-
SeriesDKM Series
-
Power Rating10 Watt
-
Output Voltage5 Volt
-
Rated Current1 Ampere
-
Input Voltage9V~18V
-
No of Output2
-
Dimming ControlNone
-
Standards MetCE
-
Operation ModeConstant Voltage
-
Operating Temperature-40°C~85°C
-
Warranty3 Year
-
Length1 in
-
Width1 in
-
Height0.4 in
-
Weight0.04 lb
::specification::
Frequently Asked Questions
Can I use the DKM10A-05 in a 12V embedded system that needs a 5V rail?
Yes, the 9-18V input range matches 12V-class systems and the unit provides 5V constant-voltage output. It is suitable for low-power embedded electronics as long as the load stays within 10W and 1A.
Is the DKM10A-05 a fit for sensor, logic, or controller boards in industrial equipment?
It is a practical option for low-power boards that run on 5V and are fed from a 9-18V source. The 10W rating and 1A output make it better suited to compact control electronics than to heavier 5V loads.
Can this converter power a 5V communications or interface module inside automation hardware?
Yes, it can support 5V constant-voltage interface electronics when the upstream supply is within 9-18V. Its 25.4 × 25.4 × 10.2 mm footprint also makes it suitable for dense embedded assemblies with limited board space.
How does the DKM10A-05 compare with the DKM10A-12 and DKM10A-15?
All three are 10W models with a 9-18V input range, but the outputs are different. The DKM10A-05 is 5V at 1A, the DKM10A-12 is 12V at 416A, and the DKM10A-15 is 15V at 333A.
Can the DKM10A-05 be used in outdoor equipment or wide-temperature enclosures?
Its operating range is -40°C to +85°C, which supports demanding temperature conditions inside equipment. No IP rating is listed, so the specs do not support direct exposed outdoor use without additional enclosure protection.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other DKM10 Models
13 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
