Over 15 years experience of providing support of MEAN WELL Power Supplies
SKM10 and DKM10 series are 10W isolated and regulated module type DC-DC converter with DIP 1"x1" package. It features international standard pins, a high efficiency up to 90%, wide working temperature range -40~+85℃, 1.5KVDC I/P-O/P isolation voltage, Compliance to EN55032 radiated Class A without additional components, continuous-mode short circuit protection, etc. The models account for different input voltage 4.7~9V, 9~18V, 18~36V and 36~75V 2:1 wide input range, and various output voltage, 3.3V/5V/12V/15V for single output and ±5V/±12V/±15V for dual outputs, which are suitable for all kinds of systems, such as industrial control, telecommunication field, distributed power architecture, and so on.
Key Features
- ✓✓✓DIP 1"x1" package with industry standard pinout
- ✓✓✓2:1 wide input range
- ✓✓✓Operating temperature range -40 ~ +85℃
- ✓✓✓No minimum load required
- ✓✓✓Comply to EN55032 radiated Class A without additional components
- ✓✓✓High efficiency up to 90%
- ✓✓✓Protections: Short circuit (Continuous} / Overload / Over voltage / Input under voltage
- ✓✓✓1.5KVDC I/O isolation
- ✓✓✓Remote ON/OFF control and Triming output (±10%)
- ✓✓✓3 years warranty
-
BrandMean Well
-
SeriesDKM Series
-
Power Rating10 Watt
-
Output Voltage15 Volt
-
Rated Current0.33 Ampere
-
Input Voltage18V~36V
-
No of Output2
-
Dimming ControlNone
-
Standards MetCE
-
Operation ModeConstant Voltage
-
Operating Temperature-40°C~85°C
-
Warranty3 Year
-
Length1 in
-
Width1 in
-
Height0.4 in
-
Weight0.04 lb
::specification::
Frequently Asked Questions
Can I use the DKM10B-15 in a 24V automation panel that needs 15V DC power?
Yes. The DKM10B-15 accepts 18-36VAC input and delivers constant voltage 15V output with a 10W rating. That makes it suitable for automation or industrial electronics that operate from that input range and need a compact converter.
Is this model suitable for embedded equipment that requires a 15V auxiliary rail?
It is intended for embedded or board-level designs that need constant voltage 15V output from an 18-36VAC source. The 25.4 × 25.4 × 10.2 mm size and 0.018 kg weight make it practical where space is limited. The 10W rating should be matched to the load requirement.
Can the DKM10B-15 be used in industrial instrumentation that runs on a 15V supply?
It can be used where the equipment needs a stable 15V constant voltage output and the source is within 18-36VAC. That aligns with many industrial instrumentation, signal interface, and control subsystems that use a dedicated auxiliary rail. The CE certification may also matter for equipment compliance planning.
Will the DKM10B-15 handle harsh indoor temperature conditions?
The listed operating temperature range is -40°C to +85°C, which supports demanding indoor equipment environments. No IP rating is stated, so the specs do not support calling it outdoor-rated. It is best considered for protected installations where environmental exposure is controlled.
What is the difference between the DKM10B-15 and the other DKM10B versions?
The DKM10B-05 is rated at 10W with 5V output and 1A, the DKM10B-12 is 10W with 12V output and 416A, and the DKM10B-15 is 10W with 15V output and 333A. All are in the same 10W series. The practical distinction is the output voltage and listed output current.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other DKM10 Models
13 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
