Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well DKM10C-05 DC-DC Converter - 10W - 36~75V in ±5V out
SKM10 and DKM10 series are 10W isolated and regulated module type DC-DC converter with DIP 1"x1" package. It features international standard pins, a high efficiency up to 90%, wide working temperature range -40~+85℃, 1.5KVDC I/P-O/P isolation voltage, Compliance to EN55032 radiated Class A without additional components, continuous-mode short circuit protection, etc. The models account for different input voltage 4.7~9V, 9~18V, 18~36V and 36~75V 2:1 wide input range, and various output voltage, 3.3V/5V/12V/15V for single output and ±5V/±12V/±15V for dual outputs, which are suitable for all kinds of systems, such as industrial control, telecommunication field, distributed power architecture, and so on.
Key Features
- ✓✓✓DIP 1"x1" package with industry standard pinout
- ✓✓✓2:1 wide input range
- ✓✓✓Operating temperature range -40 ~ +85℃
- ✓✓✓No minimum load required
- ✓✓✓Comply to EN55032 radiated Class A without additional components
- ✓✓✓High efficiency up to 90%
- ✓✓✓Protections: Short circuit (Continuous} / Overload / Over voltage / Input under voltage
- ✓✓✓1.5KVDC I/O isolation
- ✓✓✓Remote ON/OFF control and Triming output (±10%)
- ✓✓✓3 years warranty
-
BrandMean Well
-
SeriesDKM Series
-
Power Rating10 Watt
-
Output Voltage5 Volt
-
Rated Current1 Ampere
-
Input Voltage36V~75V
-
No of Output2
-
Dimming ControlNone
-
Standards MetCE
-
Operation ModeConstant Voltage
-
Operating Temperature-40°C~85°C
-
Warranty3 Year
-
Length1 in
-
Width1 in
-
Height0.4 in
-
Weight0.04 lb
::specification::
Frequently Asked Questions
Can I use the DKM10C-05 in telecom or industrial systems with a higher input bus and a 5V load?
Yes. The DKM10C-05 accepts 36-75VAC input and provides constant voltage 5V output at 10W. That makes it suitable for industrial, embedded, or communications equipment that operates from that wider input range and needs a regulated 5V rail.
Is this converter a fit for embedded controllers or logic boards that need 5V power?
It can be a fit when the source is within 36-75VAC and the load needs constant voltage 5V output. The 1A output current listing and 10W power rating define the electrical envelope. Its 25.4 × 25.4 × 10.2 mm footprint also suits compact board-level designs.
Can the DKM10C-05 be used for industrial sensors or low-power automation electronics?
It is appropriate for low-power industrial or automation electronics that require a steady 5V rail and operate from a 36-75VAC input source. The converter is rated for 10W and uses constant voltage operation. That makes it relevant for compact auxiliary power sections in control hardware.
Is the DKM10C-05 suitable for outdoor equipment or unsealed environments?
The operating temperature range is -40°C to +85°C, so the temperature spec is broad. However, no IP rating is listed, so the published specs do not establish outdoor suitability. It should be treated as a component for protected enclosures unless additional enclosure protection is provided elsewhere.
How does the DKM10C-05 compare with the other DKM10C models?
In the DKM10C family, the DKM10C-05 is 10W with 5V output and 1A, the DKM10C-12 is 10W with 12V output and 416A, and the DKM10C-15 is 10W with 15V output and 333A. All share the same 10W series format. The main differences are the output voltage and listed output current.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other DKM10 Models
13 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
