Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well DKM10E-05 DC-DC Converter - 10W - 4.7~9V in ±5V out
SKM10 and DKM10 series are 10W isolated and regulated module type DC-DC converter with DIP 1"x1" package. It features international standard pins, a high efficiency up to 90%, wide working temperature range -40~+85℃, 1.5KVDC I/P-O/P isolation voltage, Compliance to EN55032 radiated Class A without additional components, continuous-mode short circuit protection, etc. The models account for different input voltage 4.7~9V, 9~18V, 18~36V and 36~75V 2:1 wide input range, and various output voltage, 3.3V/5V/12V/15V for single output and ±5V/±12V/±15V for dual outputs, which are suitable for all kinds of systems, such as industrial control, telecommunication field, distributed power architecture, and so on.
Key Features
- ✓✓✓DIP 1"x1" package with industry standard pinout
- ✓✓✓2:1 wide input range
- ✓✓✓Operating temperature range -40 ~ +85℃
- ✓✓✓No minimum load required
- ✓✓✓Comply to EN55032 radiated Class A without additional components
- ✓✓✓High efficiency up to 90%
- ✓✓✓Protections: Short circuit (Continuous} / Overload / Over voltage / Input under voltage
- ✓✓✓1.5KVDC I/O isolation
- ✓✓✓Remote ON/OFF control and Triming output (±10%)
- ✓✓✓3 years warranty
-
BrandMean Well
-
SeriesDKM Series
-
Power Rating10 Watt
-
Output Voltage5 Volt
-
Rated Current1 Ampere
-
Input Voltage4.7V~9V
-
No of Output2
-
Dimming ControlNone
-
Standards MetCE
-
Operation ModeConstant Voltage
-
Operating Temperature-40°C~85°C
-
Warranty3 Year
-
Length1 in
-
Width1 in
-
Height0.4 in
-
Weight0.04 lb
::specification::
Frequently Asked Questions
Can I use the DKM10E-05 in a compact embedded control board that needs 5V power?
It can fit compact embedded or control assemblies that need a constant 5V output, as long as the load stays within its 10W rating and 1A output current. Its 25.4 × 25.4 × 10.2 mm size also suits space-constrained electronics.
Is the DKM10E-05 suitable for powering 5V industrial monitoring or interface circuits from a low-voltage AC source?
This model is intended for constant-voltage 5V output from a 4-9VAC input range. That makes it a fit for low-power monitoring, interface, or embedded industrial circuits that need 5V and stay within 10W.
Can the DKM10E-05 be used for low-power automation electronics that run on 5V?
It is a reasonable choice for low-power automation electronics that require a regulated 5V output rather than a higher-voltage rail. The key limits are its 10W power rating and 1A output current.
Is the DKM10E-05 OK for outdoor or harsh-temperature use?
The operating temperature range is -40°C to +85°C, which supports use across a wide temperature range. However, no IP rating is listed, so the specs do not confirm suitability for outdoor exposure or wet environments.
How does the DKM10E-05 compare with the other DKM10E models?
Within the DKM10E series, all listed models are 10W units with the same 25.4 × 25.4 × 10.2 mm dimensions, 0.018 kg weight, -40°C to +85°C operating range, CE certification, and 3-year warranty. The DKM10E-05 provides 5V at 1A, while the sibling DKM10E-12 is listed at 12V and 416A, and the DKM10E-15 is listed at 15V and 333A.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other DKM10 Models
13 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
