Mean Well HLG-240H-24A Power Supply 240W 24V - Adjustable

Yes. The HLG-240H-24A delivers 240W at 24V with a built-in potentiometer that lets you adjust the output voltage and current. This is useful for cove lighting where you want to trim the drive level to match a specific LED strip without needing an external dimmer. The CC voltage range of 12-24V gives flexibility.

Yes. At 240W and 24V, it can power substantial 24V grow light panels. The adjustable output lets you vary intensity to match plant growth stages. The IP65 water-resistant rating handles the humidity and occasional splashing found in greenhouse environments. For fully wet conditions, an IP67 model may be preferred.

Yes. With 240W at 24V, it can drive extended runs of 24V LED strips for product displays, backlit graphics, or light boxes. The adjustable output lets you precisely match the voltage to optimize brightness, and the wide 90-305VAC input works with various commercial electrical systems.

Divide 240W by your strip's rated wattage per meter. For instance, a 24V strip rated at 14.4W/m would allow about 16.6 meters (240W / 14.4W per meter = 16.67m). Always check your strip's rated power per meter and keep total load at or below 240W.

The HLG-240H-24A carries an IP65 water-resistant rating, which protects against low-pressure water jets and dust. It is suitable for covered or semi-sheltered outdoor locations but not rated for submersion or sustained heavy rain. For fully exposed installations, consider the IP67-rated HLG-240H-24 or HLG-240H-24B.

Both share the same 240W / 24V / 10A output and IP65 water-resistant rating. The HLG-240H-24A provides output voltage/current adjustment via a built-in potentiometer. The HLG-240H-24AB adds a 1-10V/PWM dimming input on top of that adjustment. Choose the -24AB if you need both manual trimming and external dimming control.