Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well HVG-150-12B Power Supply 120W 12V - Dimmable 10A

Name: Mean Well HVG-150-12B Power Supply 120W 12V - Dimmable 10A
Brand: Mean Well
SKU: HVG-150-12B
Price: 80.73 USD
Availability: InStock

wide input range 180~528VACaluminium casing

SKU HVG-150-12B

$80.73 USD

Shipping calculated at checkout.

Select model — 6 in this family

HVG-150-12B

HVG-65-12A Adjustable In stock $52.76 USD

HVG-65-12B Dimmable Backorder $56.60 USD

HVG-65-12AB Adjustable and Dimmable Backorder $61.98 USD

HVG-150-12A Adjustable Low stock $77.67 USD

HVG-150-12B Dimmable Low stock $80.73 USD

HVG-150-12AB Adjustable and Dimmable Backorder $81.81 USD

Product variants

Notify me when it's back in stock

Your order will be processed within 24 hours

Overview

HVG-150-12B is the 12V output model of this series: rated current 10A, rated power 120W, typical efficiency 87%. Type B: 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) (IP67).

HVG-150 series is a 150W AC/DC LED power supply featuring the dual mode constant voltage and constant current output. HVG-150 operates from 180~528 VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 91.5%, with the fanless design, the series is able to operate from -40℃ through as high as +85℃ case temperature under free air convection. The design of metal housing and IP67 ingress protection level allows this series to fit both indoor and outdoor applications. HVG-150 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.

Features

Wide input range 180 ~ 528VAC
Constant Voltage + Constant Current mode output
Metal housing with ClassⅠdesign
Built-in active PFC function
IP67 rating for indoor or outdoor installations
Function options: 3 in 1 dimming (dim-to-off)
Typical lifet ime>50000 hours
5 years warranty

Specifications

HVG-150-12BSpecifications from the official datasheet (2025-10-10 edition)

OUTPUT

DC VOLTAGE: 12V
CONSTANT CURRENT REGION^Note.4: 7.2~12V
RATED CURRENT: 10A
RATED POWER: 120W
RIPPLE & NOISE (max.)^Note.2: 150mVp-p
VOLTAGE TOLERANCE^Note.3: ±2.5%
LINE REGULATION: ±0.5%
LOAD REGULATION: ±2.0%
SETUP, RISE TIME^Note.6: 500ms, 80ms /230VAC, 347VAC, 480VAC
HOLD UP TIME (Typ.): 18ms/347VAC, 480VAC

INPUT

VOLTAGE RANGE^Note.5: 180 ~ 528VAC 254VDC ~ 747VDC (Please refer to "STATIC CHARACTERISTIC" section)
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR (Typ.): PF≧0.98/230VAC, PF≧0.97/277VAC, PF≧0.95/347VAC, PF≧0.93/480VAC @full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
TOTAL HARMONIC DISTORTION: THD< 20%(@ load≧50%/230VAC, 277VAC, 347VAC [@ load≧60% only for 12V model]; @ load≧75%/480VAC) (Please refer to “TOTAL HARMONIC DISTORTION (THD) ” section)
EFFICIENCY (Typ.): 87%
AC CURRENT (Typ.) 347VAC: 0.45A
AC CURRENT (Typ.) 480VAC: 0.35A
INRUSH CURRENT (Typ.): COLD START 35A(twidth=790μs measured at 50% Ipeak) at 480VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER: 4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 480VAC
LEAKAGE CURRENT: <0.75mA / 480VAC

PROTECTION

OVER CURRENT: 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT: Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE: 14.4 ~ 16.8V Shut down o/p voltage with auto-recovery or re-power on to recovery
OVER TEMPERATURE: Shut down o/p voltage, recovers automatically after temperature goes down

ENVIRONMENT

WORKING TEMP.: Tcase=-40 ~ +85℃(-40 ~ +75℃ for 12V model, -40 ~ +80℃ for 15V model)(Please refer to "OUTPUT LOAD vs TEMPERATURE" section)
MAX. CASE TEMP.: Tcase=+85℃(+75℃ for 12V model, +80℃ for 15V model)
WORKING HUMIDITY: 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03%/℃ (0 ~ 60℃)
VIBRATION: 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS^Note.7: UL8750(type”HL”), CSA C22.2 No. 250.0-08, EAC TP TC 004, IP67 approved
WITHSTAND VOLTAGE: I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
ISOLATION RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Compliance to EN55015, EN61000-3-2 Class C (@ load≧55% load,@ load≧60% only for 12V model ) ; EN61000-3-3, FCC Part 15 Subpart,EAC TP TC 020
EMC IMMUNITY: Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV), EAC TP TC 020

OTHERS

MTBF: 1796.5K hrs min. Telcordia SR-332(Bellcore) ; 158.6K hrs min. MIL-HDBK-217F (25℃)
DIMENSION: 245*68*38.8mm (L*W*H)
PACKING: 1.24Kg; 12pcs/15.9Kg/0.78CUFT

Certifications & ratings

Type: HL

MODEL ENCODING

A: Io and Vo adjustable through built-in potentiometer; IP65
B (this model): 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance); IP67
AB: Io and Vo adjustable through built-in potentiometer & 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance); IP65
D: Timer dimming function, contact MEAN WELL for details(safety pending); IP67

Test conditions and notes12

1. All parameters NOT specially mentioned are measured at 347VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Please refer to "DRIVING METHODS OF LED MODULE".
5. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
7. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
8. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75℃ or less.
9. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com.
10. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
11. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
13. This product is intended for North America lighting equipment application. Please contact your MEAN WELL sales if you have other using.

Technical drawings

HVG-150-12B Block Diagram — Block Diagram

HVG-150-12B DIMMING OPERATION — DIMMING OPERATION

HVG-150-12B OUTPUT LOAD vs TEMPERATURE(Note.9) — OUTPUT LOAD vs TEMPERATURE(Note.9)

HVG-150-12B STATIC CHARACTERISTIC — STATIC CHARACTERISTIC

HVG-150-12B TOTAL HARMONIC DISTORTION — TOTAL HARMONIC DISTORTION

HVG-150-12B MECHANICAL SPECIFICATION ※ B-Type — MECHANICAL SPECIFICATION ※ B-Type

HVG-150-12B Dimensions (mm) — Dimensions (mm)

HVG-150-12B WATERPROOF CONNECTION — WATERPROOF CONNECTION

Typical applications

LED street lighting
LED high-bay lighting
Parking space lighting
LED fishing lamp
LED greenhouse lighting
Type "HL" for use in ClassⅠ, Division 2 hazardous (Classified) location.

Downloads

Datasheet1

HVG-150-12B datasheetHVG-150-SPEC.PDF · 2025-10-10 edition PDF Download

Certificates2

UL Certificate(HVG-150)(EN) PDF Download

FCC Certificate(HVG-150)(EN) PDF Download

Test reports1

Test Report(HVG-150-12)(EN) PDF Download

Catalogues1

Mean Well LED Driver Catalog PDF Download

FAQ

Can I use the HVG-150-12B for dimmable 12V LED strips in outdoor projects?

Yes, when the strip system is a 12V load that operates within the 7.2~12V constant-current range and stays within 120W and 10A. The IP67 waterproof housing makes it especially relevant for wet or exposed outdoor lighting projects.

Is this driver suitable for 12V sign lighting in exposed weather?

It is suitable for 12V signage lighting if the load stays within 7.2~12V, 10A, and 120W. Because this version is IP67 waterproof, it is better suited to exposed weather conditions than an IP65 water-resistant alternative.

Can the HVG-150-12B be used for 12V landscape or garden lighting?

It can be used for 12V landscape lighting loads that fit the 7.2~12V CC range and remain under 120W at 10A. Its -40°C to +75°C operating temperature range and IP67 waterproof rating support demanding outdoor environments.

How do I estimate the maximum 12V strip length for this driver?

Use 120W divided by your strip's rated watts per meter to estimate the theoretical maximum length. The strip must also be compatible with 12V output and stay below the 10A maximum current. Check your strip rated power per meter before sizing the run.

Is the HVG-150-12B a better fit for wet areas than the IP65 versions?

This model is rated IP67 waterproof, while the HVG-150-12A and HVG-150-12AB are listed as IP65 water-resistant. For outdoor or wet-location lighting, IP67 is the higher ingress-protection class. The electrical rating remains 120W, 12V, and 10A.

What are the main 12V HVG models if I need to compare power levels?

At 12V, the series includes HVG-65-12A/AB/B at 60W and 5A, HVG-150-12A/AB/B at 120W and 10A, and there is no 12V listing shown for the HVG-240, HVG-320, or HVG-480 groups in the provided sibling data. Within the HVG-150 12V group, the A, AB, and B versions all share the same 120W, 12V, and 10A electrical rating.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating	Price
Mean Well HVG-150-36A Power Supply 150W 36V - Adjustable 4.17A	150.12W	36V	4.17A	IP65	$75.25	View

Please log in to write a review.