Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well ELG-200-36 Power Supply 200W 36V
The ELG-200 is a 200W Mean Well power converter (input range: 100~305VAC).
Key Features
- ✓ Input voltage range: 100~305VAC
- ✓ DC output voltage adjustable ±10%
- ✓ 3.75KVAC reinforced I/O isolation
- ✓ Protections: Short circuit / Over voltage / Over temperature
- ✓ Active PFC — meets international energy efficiency regulations
- ✓ Safety approvals: (type”HL”), CSA C22.2 No. 250.13-12;IEC/EN/AS/NZS 61347-1, IEC/EN/AS/NZS 61347-2-13 UL8750 EAC TP TC 004;BIS IS15885(for 12/12B/24/24B/36/36A/42A/48/48A/54A only) GB19510.14,GB19510.1; IP65 or IP67; KC61347 1 KC61347 2 13
- ✓ 3 years warranty
-
BrandMean Well
-
SeriesELG Series
-
Power Rating199.8 Watt
-
Output Voltage36 Volt
-
Rated Current5.55 Ampere
-
Input Voltage100V~305V
-
No of Output1
-
Dimming ControlNone
-
Standards MetBSI,CB,CCC,CE,EAC,ENEC,KC,RCM,UL
-
Operation ModeConstant Current,Constant Voltage
-
Operating Temperature-40°C~90°C
-
Warranty5 Year
-
Length9.61 in
-
Width2.8 in
-
Height1.48 in
-
Weight2.69 lb
::specification::
Frequently Asked Questions
Can the ELG-200-36 power an outdoor LED strip installation exposed to rain?
Yes. The ELG-200-36 carries an IP67 waterproof rating, protecting against water immersion up to 1 meter for 30 minutes. It is suitable for outdoor installations where the driver may be exposed to direct rain, such as exterior sign cabinets, landscape lighting, or outdoor architectural cove fixtures.
Is the ELG-200-36 a good fit for powering 36V LED strips in a large retail signage installation?
Yes. At 199.8W and 36V DC, this driver is well matched for commercial channel letter signs or illuminated retail displays using 36V LED strips. The constant current output and IP67-rated metal enclosure make it a reliable choice for demanding signage environments where long run times and moisture exposure are expected.
How many meters of 36V LED strip can the ELG-200-36 support?
The driver delivers 199.8W at 5.55A. For a 36V strip rated at 20 W/m, you can run approximately 10 m per driver (199.8 W ÷ 20 W/m). For a denser 30 W/m strip, that drops to about 6.6 m. Always verify your strip's rated power per meter and apply a 10–20% derating margin for thermal safety.
Can the ELG-200-36 be used for LED landscape lighting in regions with cold winters?
Yes. Its operating temperature range of -40°C to +90°C covers extreme cold climates. Combined with the IP67 rating, it can operate in freeze-thaw cycling environments typical of outdoor landscape installations without risk of moisture ingress or low-temperature failure.
Is the ELG-200-36 suitable for powering 36V LED modules in outdoor billboard or large-format signage?
Yes. The 199.8W output capacity and IP67 waterproof protection make it practical for large-format outdoor signage where multiple LED modules or long strip runs are required. The wide input range of 100–305VAC also allows use across different grid voltages internationally.
What are the voltage options in the ELG-200 series at the same power level?
The ELG-200 constant-voltage family covers 12V (192W at 16A), 24V (201.6W at 8.4A), 36V (199.8W at 5.55A), 42V (199.9W at 4.76A), 48V (199.68W at 4.16A), and 54V (200.88W at 3.72A). All share the same 100–305VAC input and similar physical dimensions; select the voltage that matches your LED strip or luminaire specification.
Can the ELG-200-36 power LED drivers or luminaires in a cold-storage or food processing facility?
Yes. The -40°C lower operating limit and IP67 enclosure make it appropriate for cold-storage rooms, food production areas, and wash-down environments where condensation and temperature extremes are regular conditions. The metal case provides additional mechanical protection against accidental impacts.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other ELG-200 Models
7 other models| Model | Power | Voltage | Current | IP Rating | Price | |
|---|---|---|---|---|---|---|
| Mean Well ELG-200-24DA Power Supply 200W 24V - DALI | 201.6W | 24V | 8.4A | IP67 | $56.01 | View |
| Mean Well ELG-200-24B Power Supply 200W 24V - Dimmable | 201.6W | 24V | 8.4A | IP67 | $53.51 | View |
| Mean Well ELG-200-24 Power Supply 200W 24V | 201.6W | 24V | 8.4A | IP67 | $51.37 | View |
| Mean Well ELG-200-12 Power Supply 192W 12V | 192W | 12V | 16A | IP67 | $49.88 | View |
| Mean Well ELG-200-12A Power Supply 192W 12V 3-wire Input - Adjustable | 192W | 12V | 16A | IP65 | $51.37 | View |
| Mean Well ELG-200-12-3Y AC-DC Single output LED Driver Mix Mode (CV+CC) with PFC | 200W | 12V | 16A | IP67 | $64.56 | View |
| Mean Well ELG-200-C1050A Power Supply 200W 1050mA - Adjustable | 199.5W | 200V | 1.05A | IP65 | $56.25 | View |
