888.228.9138

Free Shipping over $200 worldwide

Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well HLG-320H-48B Power Supply 320W 48V- Dimmable

premium quality, 7 years warranty, aluminium casing, high efficiency
SKU:
HLG-320H-48B

Model
$81.04 USD
Shipping calculated at checkout.
|

Your order will be processed within 24 hours

Description

Features

Universal AC input (up to 305VAC) / Full range
High efficiency up to 95%
Built-in active PFC function, PF> 0.9 for 60% of load or higher
Protections: Short circuit / Over current / Over voltage / Over temperature
IP67 / IP65 design for indoor or outdoor installations
Cooling by free air convection
Output current adjustable
Suitable for LED lighting and street lighting applications
Meet 4kV surge immunity level (IEC61000-4-5)
Multiple models for choice: A-Type: IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer B-Type: IP67 rated and built-in 3 in 1 dimming function (1~10VDC, PWM signal, or resistance) C-Type: Terminal block for I/O connection Blank-Type: IP67 rated. Cable for I/O connection D-Type(option): IP67 rated. Timer dimming function, contact MEAN WELL for details (safety pending for 150~240W)
7 years warranty

General Specification 

AC input voltage range 90~305VAC ; 127~431VDC
AC inrush current (max.) Cold start, 70A at 230VAC
DC adjustment range ±6% rated output voltage
Current adjustment range 50%~100%
Over current protection 95%~108% constant current limiting, auto-recovery
Over voltage protection 110%~140% rated output voltage
Setup, rise, hold up time 2500ms, 80ms, 15ms at full load and 230VAC
Withstand voltage I/P-O/P: 3.75kVAC, I/P-FG: 2kVAC, O/P-FG: 0.5kVAC
Working temperature -40~+70ºC (refer to output derating curve)
Safety standards UL8750, TUV EN61347-1, EN61347-2-13, PSE J61347-1, J61347-2-13 (except for C-Type) approved; UL1012, UL60950-1
EMC standards EN55015, EN55022 class B, EN61000-3-2 class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547
Connection Input UL rated, SJTW 18AWGx3C (30cm);
Connection Output A/D/Blank-Type: SJTW 14AWGx2C (30cm) ; B-Type: SJTW 14AWGx2C (30cm)+SJTW 18AWGx2C (30cm); C-Type: Terminal block
Dimension (LxWxH) (mm) 252x 90x 43.8

Specifications

  • Brand
    Mean Well
  • Series
    HLG Series
  • Power Rating
    320 Watt
  • Output Voltage
    48 Volt
  • Rated Current
    6.7 Ampere
  • Input Voltage
    90V~305V
  • No of Output
    1
  • Dimming Control
    10V PWM,1-10V,Resistance
  • Standards Met
    CB,CCC,CE,EAC,PSE,RCM,TUV,UL
  • Operation Mode
    Constant Current,Constant Voltage
  • Operating Temperature
    -40°C~90°C
  • Warranty
    7 Year
  • Length
    9.92 in
  • Width
    3.54 in
  • Height
    1.72 in
  • Weight
    4.14 lb

File Downloads

::specification::

Payment & Security

Payment methods

  • Amazon
  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • iDEAL Wero
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Frequently Asked Questions

Can I use the HLG-320H-48B for outdoor 48V LED strip lighting that needs dimming?

Yes. The HLG-320H-48B delivers 48V at up to 6.7A (320W) with an IP67 waterproof rating and a built-in dimming input. It can be exposed to rain, hose-down, or temporary submersion while still offering 1-10V/PWM dimming control for brightness adjustment.

Is the HLG-320H-48B a good fit for dimmable 48V LED facade or building-perimeter lighting?

Yes. With 320W at 48V and IP67 waterproofing, it handles fully exposed facade installations. The dimming input lets you create lighting scenes or reduce brightness overnight. The wide 90-305VAC input accommodates commercial mains supplies globally.

Can I use the HLG-320H-48B to power dimmable 48V LED landscape path lights?

Yes. At 320W it can drive multiple 48V landscape fixtures from a single driver, and the dimming input allows time-based brightness reduction for energy savings. The IP67 rating means the driver can be placed in a ground-level vault or directly in landscaped areas.

How many meters of 48V LED strip can the HLG-320H-48B support?

That depends on the strip's rated power per meter. The HLG-320H-48B supplies up to 320W at 48V. For instance, if your strip draws 15W/m, you could run about 21.3 meters (320W / 15W per meter). Check your strip's rated power per meter and keep total load at or below 320W.

Can the HLG-320H-48B be installed in a location prone to flooding or standing water?

Yes. Its IP67 rating means the enclosure withstands temporary submersion in up to 1 meter of water. This makes it suitable for light wells, storm-prone outdoor installations, and areas where occasional standing water may occur.

What are the differences between the HLG-320H-48, 48A, 48AB, and 48B models?

All four share the same 320W / 48V / 6.7A core specs. The base HLG-320H-48 has no output adjustment or dimming and is IP67 waterproof. The -48A adds a built-in potentiometer for output adjustment (IP65). The -48AB adds both adjustment and 1-10V/PWM dimming (IP65). The -48B provides dimming input only and retains the IP67 waterproof rating.

Mean Well HLG-320H-48B Power Supply 320W 48V- Dimmable
Mean Well

Mean Well HLG-320H-48B Power Supply 320W 48V- Dimmable

$81.04 USD

Features

Universal AC input (up to 305VAC) / Full range
High efficiency up to 95%
Built-in active PFC function, PF> 0.9 for 60% of load or higher
Protections: Short circuit / Over current / Over voltage / Over temperature
IP67 / IP65 design for indoor or outdoor installations
Cooling by free air convection
Output current adjustable
Suitable for LED lighting and street lighting applications
Meet 4kV surge immunity level (IEC61000-4-5)
Multiple models for choice: A-Type: IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer B-Type: IP67 rated and built-in 3 in 1 dimming function (1~10VDC, PWM signal, or resistance) C-Type: Terminal block for I/O connection Blank-Type: IP67 rated. Cable for I/O connection D-Type(option): IP67 rated. Timer dimming function, contact MEAN WELL for details (safety pending for 150~240W)
7 years warranty

General Specification 

AC input voltage range 90~305VAC ; 127~431VDC
AC inrush current (max.) Cold start, 70A at 230VAC
DC adjustment range ±6% rated output voltage
Current adjustment range 50%~100%
Over current protection 95%~108% constant current limiting, auto-recovery
Over voltage protection 110%~140% rated output voltage
Setup, rise, hold up time 2500ms, 80ms, 15ms at full load and 230VAC
Withstand voltage I/P-O/P: 3.75kVAC, I/P-FG: 2kVAC, O/P-FG: 0.5kVAC
Working temperature -40~+70ºC (refer to output derating curve)
Safety standards UL8750, TUV EN61347-1, EN61347-2-13, PSE J61347-1, J61347-2-13 (except for C-Type) approved; UL1012, UL60950-1
EMC standards EN55015, EN55022 class B, EN61000-3-2 class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547
Connection Input UL rated, SJTW 18AWGx3C (30cm);
Connection Output A/D/Blank-Type: SJTW 14AWGx2C (30cm) ; B-Type: SJTW 14AWGx2C (30cm)+SJTW 18AWGx2C (30cm); C-Type: Terminal block
Dimension (LxWxH) (mm) 252x 90x 43.8

Model

  • 185W 48V
  • 185W 48V Adjustable
  • 185W 48V Dimmable
  • 185W 48V Adjustable and Dimmable
  • 240W 48V
  • 240W 48V Adjustable
  • 240W 48V Dimmable
  • 240W 48V Adjustable and Dimmable
  • 320W 48V
  • 320W 48V Adjustable
  • 320W 48V Dimmable
  • 320W 48V Adjustable and Dimmable
  • 480W 48V
  • 480W 48V Adjustable
  • 480W 48V Dimmable
  • 480W 48V Adjustable and Dimmable
  • 600W 48V
  • 600W 48V Adjustable
  • 600W 48V Dimmable
  • 600W 48V Adjustable and Dimmable
View product