Over 15 years experience of providing support of MEAN WELL Power Supplies
The ELG-100 is a 100W Mean Well power converter (input range: 100~305VAC).
Key Features
- ✓ Input voltage range: 100~305VAC
- ✓ DC output voltage adjustable ±10%
- ✓ 3.75KVAC reinforced I/O isolation
- ✓ Protections: Short circuit / Over voltage / Over temperature
- ✓ Active PFC — meets international energy efficiency regulations
- ✓ Safety approvals: IEC62386-101, 102, 207 for DA-Type only
- ✓ 3 years warranty
-
BrandMean Well
-
SeriesELG Series
-
Power Rating95.76 Watt
-
Output Voltage42 Volt
-
Rated Current2.28 Ampere
-
Input Voltage100V~305V
-
No of Output1
-
Dimming Control0-10V,10V PWM,Resistance
-
Standards MetBSI,CB,CCC,CE,EAC,ENEC,RCM,UL
-
Operation ModeConstant Current,Constant Voltage
-
Operating Temperature-40°C~90°C
-
Warranty5 Year
-
Length7.83 in
-
Width2.48 in
-
Height1.4 in
-
Weight1.87 lb
::specification::
Frequently Asked Questions
Can I use the ELG-100-42B with a PWM dimming signal from a lighting controller?
Yes. The ELG-100-42B supports 3-in-1 dimming: 1–10V analogue, PWM signal, and resistance dimming. A PWM input from a standard lighting controller or microcontroller will modulate the output current proportionally, allowing smooth dimming of 42V LED loads.
Is the ELG-100-42B waterproof enough for outdoor LED signage?
Yes. The ELG-100-42B carries an IP67 rating, making it fully sealed against dust and water immersion up to 1 metre for 30 minutes. This level of protection is appropriate for outdoor LED channel letter signs and lightboxes exposed to direct rain.
Can I run 42V dimmable LED strips for landscape lighting with the ELG-100-42B?
Yes. The IP67 rating and -40°C to +90°C operating range make the ELG-100-42B suitable for buried or ground-mounted landscape lighting installations. The 3-in-1 dimming allows integration with landscape lighting controllers that output a 0–10V or PWM signal. At 95.76W maximum, it supports approximately 9.5 meters of 42V strip rated at 10W per meter—verify your strip’s rated power per meter.
How does the ELG-100-42B differ from the ELG-100-42 base model?
Both share the same 95.76W / 42V / 2.28A output and IP67 waterproof rating. The ELG-100-42B adds 3-in-1 dimming capability (1–10V, PWM, resistance) that the base ELG-100-42 lacks. Choose the base model for fixed-output applications; choose the ‘B’ when dimming control is required.
Can the ELG-100-42B be used for dimmable outdoor architectural facade lighting?
Yes. The combination of IP67 sealing, wide temperature tolerance (-40°C to +90°C), and 3-in-1 dimming makes the ELG-100-42B practical for dimmable facade wash or grazing fixtures rated at 42V DC. The 95.76W output is sized for medium-scale facade lighting segments.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other ELG-100 Models
7 other models| Model | Power | Voltage | Current | IP Rating | Price | |
|---|---|---|---|---|---|---|
| Mean Well ELG-100-24AB Power Supply 100W 24V - Adjustable and Dimmable | 96W | 24V | 4A | IP65 | $40.59 | View |
| Mean Well ELG-100-24 Power Supply 96W 24V | 96W | 24V | 4A | IP67 | $38.57 | View |
| Mean Well ELG-100-24DA Power Supply 96W 24V - DALI | 96W | 24V | 4A | IP67 | $43.58 | View |
| Mean Well ELG-100-48DA Power Supply 96W 48V 3-wire Input - DALI | 96W | 48V | 2A | IP67 | $43.58 | View |
| Mean Well ELG-100-48 Power Supply 96W 48V 3-wire Input | 96W | 48V | 2A | IP67 | $43.58 | View |
| Mean Well ELG-100-24-3Y Constant Voltage + Constant Current LED Driver 24V 100W | 100W | 24V | 4A | IP67 | $61.02 | View |
| Mean Well ELG-100-24DA-3Y Power Supply 100W 24V - DALI | 96W | 24V | 4A | IP67 | $49.31 | View |
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
