Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well ELG-100-48 Power Supply 96W 48V 3-wire Input 2A
The ELG-100-48-3Y is a 96W Mean Well AC-DC LED driver (input: 100~305VAC, output: 48V, operating temperature: -40~+90°C).
Key Features
- ✓ Input voltage: 100~305VAC
- ✓ Output voltage: 48V
- ✓ Rated output current: 2A
- ✓ Ingress protection: IP67
- ✓ Operating temperature: -40~+90°C
- ✓ Safety certifications: BSI, CB, CCC, CE, EAC, ENEC, RCM, UL
- ✓ 5 year warranty
-
BrandMean Well
-
SeriesELG Series
-
Power Rating96 Watt
-
Output Voltage48 Volt
-
Rated Current2 Ampere
-
Input Voltage100V~305V
-
No of Output1
-
Dimming ControlNone
-
Standards MetBSI,CB,CCC,CE,EAC,ENEC,RCM,UL
-
Operation ModeConstant Current,Constant Voltage
-
Operating Temperature-40°C~90°C
-
Warranty5 Year
-
Length7.83 in
-
Width2.48 in
-
Height1.4 in
-
Weight1.87 lb
::specification::
Frequently Asked Questions
What does the ‘-3Y’ suffix mean for the ELG-100-48-3Y, and does it change how I use it?
The ‘-3Y’ designation indicates a 3-conductor mains input configuration (line, neutral, and earth), compared to the standard 2-wire input on the base ELG-100-48. The electrical output—96W, 48V, 2A—is identical. This variant is selected when a 3-conductor earthed supply connection is required by local wiring codes or installation practice.
Is the ELG-100-48-3Y suitable for outdoor LED strip lighting exposed to rain?
Yes. The ELG-100-48-3Y carries an IP67 waterproof rating, providing full dust sealing and protection against water immersion up to 1 metre for 30 minutes. It is appropriate for outdoor LED strip installations on building exteriors, under-canopy runs, and landscape lighting circuits.
How much 48V LED strip can the ELG-100-48-3Y power?
The driver delivers a maximum of 96W at 48V. For 48V strip rated at 10W per meter, you can run approximately 9.6 meters per driver. For denser 14.4W-per-meter strip, the maximum run is roughly 6.6 meters. Always verify your strip’s rated power per meter and add a safety margin.
Can the ELG-100-48-3Y be used for 48V LED facade or wash lighting on a commercial building?
Yes. The 96W / 48V output and IP67 sealing make the ELG-100-48-3Y practical for 48V LED wall-wash or facade luminaires on commercial buildings. The 3-conductor input suits installations where a dedicated earth connection is required at the driver.
Does the ELG-100-48-3Y operate over the full international mains voltage range?
Yes. It accepts 100–305VAC, covering 120V, 230V, and 277V supplies without any hardware changes. The 3-conductor input design adds an earth terminal while maintaining the same universal voltage range.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other ELG-100 Models
6 other models| Model | Power | Voltage | Current | IP Rating | Price | |
|---|---|---|---|---|---|---|
| Mean Well ELG-100-24AB Power Supply 100W 24V - Adjustable and Dimmable 4A | 96W | 24V | 4A | IP65 | $40.59 | View |
| Mean Well ELG-100-24 Power Supply 96W 24V 4A | 96W | 24V | 4A | IP67 | $38.57 | View |
| Mean Well ELG-100-24DA Power Supply 96W 24V - DALI 4A | 96W | 24V | 4A | IP67 | $43.58 | View |
| Mean Well ELG-100-48DA Power Supply 96W 48V 3-wire Input - DALI 2A | 96W | 48V | 2A | IP67 | $43.58 | View |
| Mean Well ELG-100-24-3Y Constant Voltage + Constant Current LED Driver 24V 100W 4A | 100W | 24V | 4A | IP67 | $65.99 | View |
| Mean Well ELG-100-24DA-3Y Power Supply 100W 24V - DALI 4A | 96W | 24V | 4A | IP67 | $49.31 | View |
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
