Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well ELG-200-42D2 AC-DC Single output LED Driver Mix Mode (CV+...
The ELG-200 is a 200W Mean Well power converter (input range: 100~305VAC).
Key Features
- ✓ Input voltage range: 100~305VAC
- ✓ DC output voltage adjustable ±10%
- ✓ 3.75KVAC reinforced I/O isolation
- ✓ Protections: Short circuit / Over voltage / Over temperature
- ✓ Active PFC — meets international energy efficiency regulations
- ✓ Safety approvals: (type”HL”), CSA C22.2 No. 250.13-12;IEC/EN/AS/NZS 61347-1, IEC/EN/AS/NZS 61347-2-13 UL8750 EAC TP TC 004;BIS IS15885(for 12/12B/24/24B/36/36A/42A/48/48A/54A only) GB19510.14,GB19510.1; IP65 or IP67; KC61347 1 KC61347 2 13
- ✓ 3 years warranty
-
BrandMean Well
-
SeriesELG Series
-
Power Rating200 Watt
-
Output Voltage42 Volt
-
Rated Current4.76 Ampere
-
Input Voltage100V~305V
-
No of Output1
-
Standards MetBSMI,CB,CE,EAC,UL
-
Operation ModeConstant Current,Constant Voltage
-
Operating Temperature-40°C~90°C
-
Warranty5 Year
-
Length9.61 in
-
Width2.8 in
-
Height1.48 in
-
Weight2.69 lb
::specification::
Frequently Asked Questions
Can I use the ELG-200-42D2 with a 0–10V dimming controller in a commercial lighting system?
Yes. The D2 suffix designates three-in-one dimming: 0–10V analog, PWM signal, and resistance (potentiometer). This makes the ELG-200-42D2 directly compatible with standard 0–10V wall dimmers and BAS dimming outputs common in commercial office and retail lighting control systems.
Is the ELG-200-42D2 suitable for outdoor LED feature lighting?
Yes. The IP67 rating means the driver tolerates temporary water immersion up to 1 meter, making it appropriate for outdoor plinth lighting, buried luminaire drivers, and exposed outdoor LED features. The -40°C to +90°C operating temperature range handles both cold-climate winters and hot enclosure conditions.
How many meters of LED strip can the ELG-200-42D2 support?
The driver outputs 200W at 42V. Divide 200W by your strip's rated wattage per meter to estimate length; for an 8W/m strip that is 25 m (200 ÷ 8), and for a 14W/m strip it is roughly 14 m (200 ÷ 14). Always derate by at least 20% for thermal headroom, reducing those examples to approximately 20 m and 11 m respectively. Check your strip's rated power per meter for an accurate figure.
Can the ELG-200-42D2 power LED modules in a museum display or gallery case?
Yes. The three-in-one D2 dimming input allows precise brightness control via an analog 0–10V signal, which is common in museum lighting control systems. At 200W and 42V it can drive a substantial array of display LED modules from a single driver, reducing wiring complexity inside display cases.
Is the ELG-200-42D2 appropriate for LED lighting in food processing or wash-down areas?
IP67 protection covers temporary immersion, so it handles incidental water jets and heavy condensation typical of food processing environments. However, IP67 is not equivalent to a full wash-down or IP69K rating; if high-pressure hot cleaning is routine, a dedicated wash-down enclosure is recommended around the driver.
Can the ELG-200-42D2 be used to drive a 42V LED strip in a horticultural grow-light application?
Yes. At 200W and 42V constant-current output with IP67 protection against the high humidity in grow rooms, the ELG-200-42D2 is a practical choice for horticultural LED strip arrays. The D2 dimming input also allows integration with photoperiod and intensity controllers common in controlled-environment agriculture.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other ELG-200 Models
7 other models| Model | Power | Voltage | Current | IP Rating | Price | |
|---|---|---|---|---|---|---|
| Mean Well ELG-200-24DA Power Supply 200W 24V - DALI | 201.6W | 24V | 8.4A | IP67 | $56.01 | View |
| Mean Well ELG-200-24B Power Supply 200W 24V - Dimmable | 201.6W | 24V | 8.4A | IP67 | $53.51 | View |
| Mean Well ELG-200-24 Power Supply 200W 24V | 201.6W | 24V | 8.4A | IP67 | $51.37 | View |
| Mean Well ELG-200-12 Power Supply 192W 12V | 192W | 12V | 16A | IP67 | $49.88 | View |
| Mean Well ELG-200-12A Power Supply 192W 12V 3-wire Input - Adjustable | 192W | 12V | 16A | IP65 | $51.37 | View |
| Mean Well ELG-200-12-3Y AC-DC Single output LED Driver Mix Mode (CV+CC) with PFC | 200W | 12V | 16A | IP67 | $59.29 | View |
| Mean Well ELG-200-C1050A Power Supply 200W 1050mA - Adjustable | 199.5W | 200V | 1.05A | IP65 | $56.25 | View |
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
