Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well HVGC-65-500A Power Supply 65W 500mA - Adjustable
The HVGC-65 is a 65W Mean Well DIN rail power converter with a 189mm profile (input range: 180~528VAC).
Key Features
- ✓ 189mm width — DIN rail TS-35 compatible
- ✓ Input voltage range: 180~528VAC
- ✓ 3.75KVAC reinforced I/O isolation
- ✓ Protections: Short circuit / Over voltage / Over temperature
- ✓ Active PFC — meets international energy efficiency regulations
- ✓ Safety approvals: UL8750, CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13, EN62384, independent, EAC TP TC 004 IP65 or IP67
- ✓ 3 years warranty
-
BrandMean Well
-
SeriesHVGC Series
-
Power Rating65 Watt
-
Output Voltage130 Volt
-
Rated Current0.5 Ampere
-
Input Voltage180V~528V
-
No of Output1
-
Dimming ControlBuilt-in Potentiometer
-
Standards MetCB,CE,EAC,ENEC,FCC,UL
-
Operation ModeConstant Current
-
Operating Temperature-40°C~80°C
-
Warranty5 Year
-
Length7.44 in
-
Width2.42 in
-
Height1.45 in
-
Weight1.7 lb
::specification::
Frequently Asked Questions
Can I use the HVGC-65-500A for LED downlights that need 500mA constant current?
Yes, this driver is built for constant current LED loads at 500mA, which is a common requirement for LED downlights. The connected load's total forward voltage needs to stay within the 13-130V constant current range and within the 65W rating. It is not intended for constant voltage LED products.
Is the HVGC-65-500A suitable for signage LED modules or small LED arrays?
It can be a fit for signage modules or small LED arrays when the LEDs are designed for constant current operation at 500mA. The full LED load must fall inside the 13-130V CC range, and the exact number of LEDs depends on the forward voltage of each LED. Constant voltage modules should use a constant voltage power supply instead.
Can this driver run a longer series string of high-forward-voltage LEDs?
This model is intended for constant current loads and supports up to 130V output with a 13-130V constant current range. That makes it more suitable for higher total forward-voltage LED strings than low-voltage constant current drivers. The actual number of LEDs depends on the forward voltage of each LED.
How do I know if my LED load is compatible with the HVGC-65-500A?
Match the LED requirement to 500mA constant current first, then check that the total forward voltage of the load stays within 13-130V. The number of LEDs cannot be fixed from the driver alone because it depends on each LED's forward voltage. This is a constant current driver, not a constant voltage supply.
Is the HVGC-65-500A okay for damp or outdoor locations?
It has an IP65 water-resistant rating, so it is suited to environments where dust protection and resistance to water jets are needed. Its operating temperature range is -40°C to +80°C, which supports demanding ambient conditions. For applications needing full waterproof submersion-level protection, verify whether IP65 is sufficient for the site.
How does the HVGC-65-500A compare with other 65W HVGC current options?
Within the 65W HVGC group, the 350mA versions are rated at 65.1W with an 18-186V CC range, the 500mA versions are 65W or 65.1W with a 13-130V CC range, the 700mA versions are 65.1W with a 9-93V CC range, and the 1050mA versions are 65.1W with a 6-62V CC range. As current increases across those siblings, the constant current voltage range becomes lower. This HVGC-65-500A sits in the middle at 500mA and 13-130V.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other HVGC-65 Models
11 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
