Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well GEM60I24-P1J Power Supply 60W 24V

Q: Can I use the GEM60I24-P1J for 24V automation and control equipment?

Yes, this model is designed as a constant voltage 24V power supply with 2.5A output current and 60W total output. It is suited to 24V automation, control, and embedded equipment that stays within those ratings.

Q: Is the GEM60I24-P1J appropriate for 24V industrial sensors, relays, or interface modules?

It can be, provided the connected system is intended for a constant 24V DC source. The load must remain at or below 2.5A and 60W based on the published specifications.

Q: Can this 24V supply be used for small OEM machines or embedded control assemblies?

Yes, that is a common fit for a 24V constant voltage supply in this power class. The main requirement is that the application needs 24V DC and does not exceed 2.5A or 60W.

Q: How do I size my load against the GEM60I24-P1J?

Match the application to a constant 24V output, then verify the total current draw is no more than 2.5A and the total power stays within 60W. If either value is higher, this supply is not large enough for that load.

Q: Is this 24V power supply rated for outdoor or washdown environments?

The listed operating temperature range is -30°C to +70°C, which provides a wide temperature envelope. However, the provided specs do not list an IP rating, so the product data does not confirm protection for outdoor, washdown, or dusty exposed use.

SKU:

GEM60I24-P1J

$33.04 USD

Shipping calculated at checkout.

Notify me when it's back in stock

Your order will be processed within 24 hours

Description

Features

Interchangeable AC plugs (plug kit sold separately)

Medical safety approved(2 xMOPP) according to 60601-1

Extremely low leakage current

No-load power consumption <0.15W

Energy efficiency Level V

-30 ~ +70°C wide range working temperature

Class II power (without earth pin)

Protections: Short circuit/ Overload/ Over voltage

Fully enclosed plastic case

3 years warranty

General Specification

AC input voltage range	80~264VAC; 113 ~ 370VDC
AC inrush current (max.)	Cold start, 50A / 115VAC; 100A / 230VAC
Setup, rise, hold up time	500ms, 30ms, 10ms at 230VAC input
Overload protection	105 ~ 160% rated output power; Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over-voltage protection	110%~140% rated output voltage; Protection type: Clamp by Zener diode, output short
Withstand voltage	I/P-O/P:5656VDC
Working temperature	-30~+70°C (refer to output derating curve)
Safety standards	TUV BS EN/EN60601-1/BS ANSI/AAMI ES60601-1-11
EMC standards	EN55011 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11
Length of output cable	UL2468 22AWG 1200mm for 5-9V, UL2468 18AWG 1800mm for 12-24V
Dimension (LxWxH)	75.5x 39.1x 56.2 mm
Standard DC plug	P1J: 2.1ID x 5.5OD x 11L, tuning fork type

Specifications

Brand

Mean Well
Series

GEM Series
Power Rating

60 Watt
Output Voltage

24 Volt
Rated Current

2.5 Ampere
Input Voltage

80V~264V
No of Output

1
Dimming Control

None
Standards Met

CB,CE,EAC,FCC,TUV,UL
Operation Mode

Constant Voltage
Operating Temperature

-30°C~70°C
Warranty

3 Year
Length

2.97 in
Width

2.21 in
Height

1.54 in
Weight

0.44 lb

File Downloads

::specification::

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Frequently Asked Questions

Can I use the GEM60I24-P1J for 24V automation and control equipment?

Yes, this model is designed as a constant voltage 24V power supply with 2.5A output current and 60W total output. It is suited to 24V automation, control, and embedded equipment that stays within those ratings.

Is the GEM60I24-P1J appropriate for 24V industrial sensors, relays, or interface modules?