Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well MPS-200-48 Power Supply 200W 48V he rated current is base...
MEAN WELL MPS-200 Series Power Supplies are 200W medical type power supplies with high reliability and 3 years warranty.
Key Features
- ✓Universal AC input
- ✓Full range
- ✓Low leakage Current<180uA
- ✓Protections:
- ✓Short circuit
- ✓Overload/Over voltage/Over temperature
- ✓Free air convection for 140W and forced air convection 200W
- ✓ANSI/AAMIES60601-1 medical safety approved
- ✓With power good and fail signal output
- ✓Built-in remote ON-OFF control
- ✓Built-in remote sense function
- ✓Fixed switching frequency at 100KHz
- ✓3 years warranty
-
BrandMean Well
-
SeriesMPS Series
-
Power Rating200 Watt
-
Output Voltage48 Volt
-
Rated Current4.2 Ampere
-
Input Voltage90V~264V
-
No of Output1
-
Dimming ControlNone
-
Standards MetCB,CE,TUV,UL
-
Operation ModeConstant Voltage
-
Operating Temperature-20°C~70°C
-
Warranty3 Year
-
Length7 in
-
Width4.22 in
-
Height1.4 in
-
Weight1.46 lb
::specification::
Frequently Asked Questions
Can I use the MPS-200-48 for 48V industrial automation or control systems?
Yes, this model provides 48V constant-voltage output at 200W and 4.2A. It is suitable for 48V automation, control, and industrial electronics that are designed for a 48V DC supply within that output range.
Is the MPS-200-48 appropriate for 48V networking or telecom equipment?
It can be a fit for 48V telecom, networking, and communications hardware that expects a constant 48V DC input. The 4.2A output gives more current capacity than smaller 48V models when a single supply needs to support a heavier 48V load.
Would this 48V power supply work for embedded or industrial PoE-adjacent systems that run on 48V DC?
It is suitable for embedded and industrial systems that take a 48V constant-voltage input and stay within 200W and 4.2A. Buyers typically choose this type of output where 48V distribution is preferred over lower-voltage, higher-current rails.
Can the MPS-200-48 power a 48V bench setup or validation rig?
Yes, it can serve as a 48V source for development benches, validation rigs, and industrial test equipment that need a constant-voltage supply. Its 90-264VAC input is useful when the bench may be operated from different AC mains sources.
Is the MPS-200-48 rated for outdoor exposure?
The published specs include an operating temperature range of -20°C to +70°C, but no IP rating is listed. That points to indoor or enclosure-protected use instead of direct outdoor exposure.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other MPS-200 Models
5 other models| Model | Power | Voltage | Current | IP Rating | Price | |
|---|---|---|---|---|---|---|
| Mean Well MPS-200-5 Power Supply 200W 5V he rated current is based on there being a fan that can provide 25CFM. 40A | 200W | 5V | 40A | Indoor | $135.48 | View |
| Mean Well MPS-200-3.3 Power Supply 132W 3.3V he rated current is based on there being a fan that can provide 25CFM. 40A | 132W | 3.3V | 40A | Indoor | $135.48 | View |
| Mean Well MPS-200-24 Power Supply 200W 24V he rated current is based on there being a fan that can provide 25CFM. 8.4A | 200W | 24V | 8.4A | Indoor | $135.48 | View |
| Mean Well MPS-200-15 Power Supply 200W 15V he rated current is based on there being a fan that can provide 25CFM. 13.4A | 200W | 15V | 13.4A | Indoor | $135.48 | View |
| Mean Well MPS-200-12 Power Supply 200W 12V he rated current is based on there being a fan that can provide 25CFM. 16.7A | 200W | 12V | 16.7A | Indoor | $135.48 | View |
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
