Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well HLN-60H-48B Power Supply 60W 48V - IP64, Dimmable
Notify me when it's back in stock
Your order will be processed within 24 hours
Mean Well HLN-60H-48B Power Supply 60W 48V - IP64, Dimmable
The HLN-60H is a 60W Mean Well power converter (input range: 90~305VAC, operating temperature: -40~+50℃).
Key Features
- ✓ Input voltage range: 90~305VAC
- ✓ DC output voltage adjustable ±10%
- ✓ 3.75KVAC reinforced I/O isolation
- ✓ Wide operating temperature: -40~+50℃
- ✓ Protections: Short circuit / Over voltage / Over temperature
- ✓ Active PFC — meets international energy efficiency regulations
- ✓ Safety approvals: UL8750, CSA C22.2 No. 250.0-08 (except for 48V, 54V), EN61347-1, EN61347-2-13 independent, IP64, J61347-1, J61347-2-13
- ✓ 3 years warranty
-
BrandMean Well
-
SeriesHLN Series
-
Power Rating62.4 Watt
-
Output Voltage48 Volt
-
Rated Current1.3 Ampere
-
Input Voltage90V~305V
-
No of Output1
-
Dimming Control10V PWM,1-10V,Resistance
-
Standards MetCB,CCC,CE,EAC,PSE,TUV,UL
-
Operation ModeConstant Current,Constant Voltage
-
Operating Temperature-40°C~50°C
-
Warranty3 Year
-
Length6.34 in
-
Width2.42 in
-
Height1.38 in
-
Weight1.01 lb
::specification::
Frequently Asked Questions
Can I use the HLN-60H-48B for 48V LED signage lighting?
It can fit 48V signage lighting that needs a constant current driver and stays within the driver's 62.4W, 1.3A, and 28-48V constant-current range. The IP64 housing also matches signage use where dust and splashing water are concerns.
Is the HLN-60H-48B suitable for 48V linear lighting fixtures in damp areas?
Yes, if the fixture is designed for constant current operation and its electrical requirement falls within 28-48V at up to 1.3A. With an IP64 case and an operating range of -40°C to +50°C, it is suited to lighting applications exposed to dust or water spray rather than fully submerged conditions.
Can this driver power a 48V architectural lighting run?
It can work for a 48V architectural lighting run when the load stays at or below 62.4W and matches the 28-48V constant-current range. This model is a Class 2 power unit, which is often preferred where a lower-power remote driver is needed.
How much 48V LED strip can the HLN-60H-48B support?
Use the driver's 62.4W maximum to estimate length: max strip length = 62.4W divided by your strip's rated watts per meter. Check your strip rated power per meter first, and confirm the strip is actually compatible with a 48V constant-current driver rather than a constant-voltage supply.
Is the HLN-60H-48B okay for outdoor or wet locations?
Its IP64 rating means it is built to resist dust and splashing water, so it is suitable for outdoor or wet-area use where direct spray or weather exposure is expected. IP64 does not indicate submersion protection, so it is for splash-prone environments rather than underwater use.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other HLN-60H Models
15 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
