Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well ELG-75-36A Power Supply 75W 36V - Adjustable
The ELG-75 is a 75W Mean Well power converter (input range: 100~305VAC).
Key Features
- ✓ Input voltage range: 100~305VAC
- ✓ DC output voltage adjustable ±10%
- ✓ 3.75KVAC reinforced I/O isolation
- ✓ Protections: Short circuit / Over voltage / Over temperature
- ✓ Active PFC — meets international energy efficiency regulations
- ✓ 3 years warranty
-
BrandMean Well
-
SeriesELG Series
-
Power Rating75.6 Watt
-
Output Voltage36 Volt
-
Rated Current2.1 Ampere
-
Input Voltage100V~305V
-
No of Output1
-
Dimming ControlBuilt-in Potentiometer
-
Standards MetBSI,CB,CCC,CE,EAC,ENEC,KC,RCM,UL
-
Operation ModeConstant Current,Constant Voltage
-
Operating Temperature-40°C~85°C
-
Warranty5 Year
-
Length7.09 in
-
Width2.48 in
-
Height1.4 in
-
Weight1.76 lb
::specification::
Frequently Asked Questions
What does the 'A' suffix mean on the ELG-75-36A?
The 'A' suffix indicates that the driver includes an external potentiometer for adjusting both output voltage and current within a defined range, without requiring changes to the input wiring. This trim function lets installers fine-tune brightness to a fixed level during commissioning.
Can the ELG-75-36A be used for outdoor LED architectural lighting?
The ELG-75-36A carries an IP65 water-resistance rating, which protects against low-pressure water jets from any direction. It is suitable for covered outdoor locations and weather-protected enclosures, but not for direct submersion or high-pressure washdown environments.
How many meters of 36V LED strip can the ELG-75-36A drive?
At its rated 75.6W output and 36V, the ELG-75-36A supports roughly 7.5 meters of 10W/m strip or approximately 5.2 meters of 14.4W/m strip. Check your strip's rated power per meter before sizing the run to keep the load within 75.6W.
Is the ELG-75-36A appropriate for powering 36V LED modules in a light box or display cabinet?
Yes. Light box and display cabinet applications using 36V LED modules are well within the ELG-75-36A's 75.6W capacity. The output trim function also allows the installer to set a precise output level for consistent luminance across a display installation.
Can the ELG-75-36A be used to drive 36V COB LED strips in pendant commercial fixtures?
Yes. COB LED strip and panel applications requiring 36V are a common use case. The adjustable output allows minor brightness calibration, and the 2.1A current limit provides protection for sensitive COB modules.
Does the ELG-75-36A accept international mains voltages?
Yes. The 100–305VAC universal input range covers 100V (Japan), 120V (North America), 230V (Europe), and 277V (US commercial) circuits without modification.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
