Over 15 years experience of providing support of MEAN WELL Power Supplies
The ELG-75 is a 75W Mean Well power converter (input range: 100~305VAC).
Key Features
- ✓ Input voltage range: 100~305VAC
- ✓ DC output voltage adjustable ±10%
- ✓ 3.75KVAC reinforced I/O isolation
- ✓ Protections: Short circuit / Over voltage / Over temperature
- ✓ Active PFC — meets international energy efficiency regulations
- ✓ 3 years warranty
-
BrandMean Well
-
SeriesELG Series
-
Power Rating60 Watt
-
Output Voltage12 Volt
-
Rated Current5 Ampere
-
Input Voltage100V~305V
-
No of Output1
-
Dimming ControlBuilt-in Potentiometer
-
Standards MetBSI,CB,CCC,CE,EAC,ENEC,KC,RCM,UL
-
Operation ModeConstant Current,Constant Voltage
-
Operating Temperature-40°C~85°C
-
Warranty5 Year
-
Length7.09 in
-
Width2.48 in
-
Height1.4 in
-
Weight1.76 lb
::specification::
Frequently Asked Questions
Can the ELG-75-12A be installed outdoors for 12V LED landscape or pathway lighting?
The ELG-75-12A is rated IP65, which provides protection against dust and low-pressure water jets but is not rated for temporary water immersion. It is appropriate for covered outdoor locations such as under-eave mounting or in weatherproof enclosures, but should not be directly submerged or exposed to standing water.
How many meters of 12V LED strip can the ELG-75-12A power?
The ELG-75-12A outputs 60W at 12V. For a 7.2 W/m strip, that supports approximately 8.3 meters (60 ÷ 7.2); for a 10 W/m strip, up to 6 meters. Always verify your strip's rated power per meter and apply a 20% derating margin for thermal reliability.
Is the ELG-75-12A suitable for 12V LED strip in retail display case or under-counter lighting?
Yes. The 60W output at 12V and compact 180 × 63 × 35.5 mm housing fit easily into display case enclosures or under-counter lighting channels. The IP65 rating tolerates the cleaning sprays and humidity typical of retail food and merchandise display environments.
Can the ELG-75-12A be used for 12V LED channel letter lighting on interior signage?
Yes. At 60W and 12V with a 5A output, the ELG-75-12A powers small to medium 12V LED module runs for interior illuminated signs and channel letters. The adjustable output voltage allows fine-tuning to compensate for voltage drop across the LED array.
What does the 'A' suffix indicate on the ELG-75-12A, and what can be adjusted?
The A suffix means the output voltage and current are adjustable via built-in trimmers. The CC voltage range of 6–12V allows the output to be fine-tuned to match the specific requirements of the connected LED load or to compensate for cable voltage drop without external components.
Is the ELG-75-12A suitable for powering 12V LED lighting in museum or gallery display cases?
Yes. The adjustable output enables precise voltage matching to low-heat, high-CRI LED strips used in display case lighting. The 5-year warranty and broad certification set including UL, CE, CCC, and ENEC support use in permanent institutional installations with strict procurement requirements.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other ELG-75 Models
23 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.




