Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well HBG-200-48AB Power Supply 200W 48V - Adjustable and Dimmable
Notify me when it's back in stock
Your order will be processed within 24 hours
Mean Well HBG-200-48AB Power Supply 200W 48V - Adjustable and Dimmable
The HBG-200 is a 200W Mean Well power converter (input range: 21.6~36V).
Key Features
- ✓ Input voltage range: 21.6~36V
- ✓ 3.75KVAC reinforced I/O isolation
- ✓ Cooling by free air convection
- ✓ Protections: Short circuit / Over voltage / Over temperature
- ✓ Active PFC — meets international energy efficiency regulations
- ✓ Safety approvals: DALI STANDARDS
- ✓ 3 years warranty
-
BrandMean Well
-
SeriesHBG Series
-
Power Rating196.8 Watt
-
Output Voltage48 Volt
-
Rated Current4.1 Ampere
-
Input Voltage90V~305V
-
No of Output1
-
Dimming Control10V PWM,1-10V,Built-in Potentiometer,Resistance
-
Standards MetCB,CE,EAC,ENEC,UL
-
Operation ModeConstant Current,Constant Voltage
-
Operating Temperature-40°C~85°C
-
Warranty5 Year
-
Length5.97 in
-
Width5.97 in
-
Height2.62 in
-
Weight3.37 lb
::specification::
Frequently Asked Questions
Can the HBG-200-48AB run a 48V high bay LED light?
Yes, it is rated for constant current operation across 28-48V with 4.1A output and 196.8W maximum power. The HBG series feature list specifically notes high and low bay light use.
Is this driver suitable for 48V illuminated signage in a damp area?
It can be used for 48V signage loads when the total demand stays within 196.8W and the load matches the 28-48V constant current range. Its IP65 water-resistant housing is appropriate for damp or splash-prone areas where full IP67 sealing is not required.
Can I use the HBG-200-48AB for covered outdoor architectural lighting?
Yes, for 48V constant current fixtures that operate within 28-48V and up to 4.1A. The driver is rated for -40°C to +85°C operation and has an IP65 enclosure for water-resistant protection.
What is the maximum 48V LED strip length this driver can handle?
Size the run from the 196.8W maximum output: maximum length = 196.8W divided by the strip watts per meter. Check your strip rated power per meter before final sizing, and keep the load within the 28-48V range.
Is the HBG-200-48AB meant for direct rain and wet outdoor exposure?
This model is IP65 water-resistant, so it is intended for protection against dust and water spray rather than the deeper sealing level associated with IP67. It is also rated for operation from -40°C to +85°C.
How does the HBG-200-48AB compare with the other 200W HBG output voltages?
The 48V models are rated at 196.8W with a 28-48V range and 4.1A output. The 36V versions are 198W with 21-36V and 5.5A, while the 60V versions are 198W with 36-60V and 3.3A.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other HBG-200 Models
14 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
