Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well GSM60B48-P1J Power Supply 60W 48V
Description
Description
Features
| Universal AC input / Full range |
| 2 pole AC inlet IEC320-C8 |
| Medical safety approved (2 x MOPP between primary to secondary) |
| Low leakage current <50uA |
| No load power consumption < 0.1W |
| High efficiency up to 91.5% |
| Class II power (with earth pin) |
| Protections: Short circuit / Overload / Over voltage / Over temperature |
| Fully enclosed plastic case |
| LED indicator for power on |
| Optional lock type DC plug |
| 100% full load burn-in test |
| 3 years warranty |
General Specification
| AC input voltage range | 80~264VAC ; 120~370VDC |
| AC inrush current (max.) | Cold start, 65A at 230VAC |
| Overload protection | 105%~160% rated output voltage, hiccup mode, auto-recovery |
| Withstand voltage | I/P-O/P: 4kVAC |
| Working temperature | -30~+60°C (refer to output derating curve ) |
| Safety standards | ANSI/AAMI ES60601-1/ ES60601-1-11 , TUV EN60601/60601-1-11 approved |
| EMC standards | EN55011(CISPR11) class B, EN61000-3-2,3, FCC part 15 class B, EN61000-4-2,3,4,5,6,8,11,EN55024, EN61204-3,EN60601-1-2 |
| Length of output cable | 100cm of UL2464, 16AWG for 5~7.5V ; 100cm of UL1185, 16AWG for 9~12V; 150cm of UL1185, 16AWG for 15~48V |
| Dimension (LxWxH) | 125x 50x 31.5 mm |
| Standard DC plug | P1J: 2.1øx5.5øx11mm / C+, tuning fork type |
Specifications
Specifications
-
BrandMean Well
-
SeriesGSM Series
-
Power Rating60 Watt
-
Output Voltage48 Volt
-
Rated Current1.25 Ampere
-
Input Voltage80V~264V
-
No of Output1
-
Dimming ControlNone
-
Standards MetCB,CE,EAC,FCC,TUV,UL
-
Operation ModeConstant Voltage
-
Operating Temperature-30°C~70°C
-
Warranty3 Year
-
Length4.92 in
-
Width1.97 in
-
Height1.24 in
-
Weight0.71 lb
File Downloads
File Downloads
::specification::
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Frequently Asked Questions
Can I use the GSM60B48-P1J to power 48V industrial networking or telecom equipment?
Yes, for equipment that is designed for 48V DC constant-voltage input. This model supplies up to 1.25A with a maximum output of 60W, so the load needs to remain within those limits.
Is this 48V power supply suitable for embedded communications devices or control interfaces?
It can be suitable for 48V embedded or communications hardware that requires a fixed-voltage DC source. The important electrical limits are 48V output, 1.25A maximum current, and 60W total power.
Will the GSM60B48-P1J work for 48V industrial monitoring or data collection systems?
It can be used where the end device expects 48V DC and the total draw stays at or below 1.25A. Because it is a constant-voltage supply, it should be paired only with loads specified for 48V input.
Can this model be used on a bench or in a control panel where AC input may vary?
Yes, the 80-264VAC input range supports use across a broad AC input range. On the DC side, it remains a 48V constant-voltage source with a 60W maximum output.
Is the GSM60B48-P1J suitable for outdoor environments or temperature extremes?
The specified operating range is -30°C to +70°C, so the temperature rating is suitable for a wide range of environments. No IP rating is listed, so outdoor or wet-location suitability cannot be verified from the provided specifications.
