Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well XLC-60-48-S LED Driver 60W 48V with Strain-relief
Key Features
- ✓Constant power mode output with multiple stages selectable by dip switch or NFC setting(H-type)
- ✓Constant voltage mode output (12V/24V/48V)
- ✓Plastic housing with class II/2 and PFC design
- ✓Flicker-free, complying with IEEE1789/ErP
- ✓Standby power consumption <0.5W
- ✓Meet emergency lighting (EL) function application
- ✓Minimum dimming level 0.1% (DALI-2 DT6)
- ✓Dimming functions: 3 in 1 dimming (Dim-to-off) DALI-1 + Push dimming
- ✓5 years warranty
-
BrandMean Well
-
SeriesMean Well XLC Series
-
Power Rating60 Watt
-
Output Voltage48 Volt
-
Rated Current1.25 Ampere
-
Input Voltage110V~305V
-
No of Output1
-
Dimming ControlNon Dimmable
-
Standards MetCB,CCC,CE,EAC,ENEC,SELV
-
Operation ModeConstant Voltage
-
Operating Temperature-25°C~90°C
-
Warranty5 Year
-
Length6.93 in
-
Width1.26 in
-
Height1.77 in
::specification::
Frequently Asked Questions
Can I use the XLC-60-48-S to drive 48V LED strip lighting in a retail or architectural setting?
Yes, the XLC-60-48-S is suitable for powering 48V LED strips in retail fixtures, cove lighting, and architectural installations. It provides 60W at 48V with flicker-free constant voltage output, and its strain-relief fitting makes it easier to route cables securely in finished ceiling or wall assemblies.
Is the XLC-60-48-S appropriate for powering 48V LED modules in illuminated signage?
The XLC-60-48-S can supply 48V LED modules used in channel letter and backlit signage up to a combined 60W load. The Class II, built-in rated design simplifies integration into sign enclosures, and the strain-relief fitting helps protect the cable where it exits the housing under mechanical stress.
How does the XLC-60-48-S differ from the standard XLC-60-48?
The XLC-60-48-S and XLC-60-48 are electrically identical — both output 60W at 48V, 1.25A with a 110–305VAC input range and the same 176mm × 32mm × 45mm dimensions. The only difference is that the XLC-60-48-S includes a factory-fitted strain-relief cable fitting, which mechanically secures the output cable and reduces wear at the housing exit point.
How much 48V LED strip can the XLC-60-48-S support?
The XLC-60-48-S delivers a maximum of 60W at 48V. The supported strip length depends on your strip's wattage per meter — for instance, a 10W/m strip allows up to 6 meters, while an 8W/m strip allows up to 7.5 meters. Check your specific strip's rated power per meter to calculate the actual maximum run.
Can the XLC-60-48-S be mounted inside a luminaire or enclosed fixture?
Yes, the XLC-60-48-S is designated for built-in use and operates across -25°C to +90°C, making it compatible with the thermal environment inside enclosed luminaires. The strain-relief fitting also helps manage cable routing in tight fixture interiors. It is not IP-rated, so it must be shielded from moisture in damp or outdoor locations.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other XLC-60 Models
25 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
