Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well XLC-60-H-BN LED Driver 60W 1400mA 9~54V Constant Power, 3 in 1 Dimming, NFC Current Setting
Notify me when it's back in stock
Your order will be processed within 24 hours
Mean Well XLC-60-H-BN LED Driver 60W 1400mA 9~54V Constant Power, 3...
Key Features
- ✓Constant power mode output with multiple stages selectable by dip switch or NFC setting(H-type)
- ✓Constant voltage mode output (12V/24V/48V)
- ✓Plastic housing with class II/2 and PFC design
- ✓Flicker-free, complying with IEEE1789/ErP
- ✓Standby power consumption <0.5W
- ✓Meet emergency lighting (EL) function application
- ✓Minimum dimming level 0.1% (DALI-2 DT6)
- ✓Dimming functions: 3 in 1 dimming (Dim-to-off) DALI-1 + Push dimming
- ✓5 years warranty
-
BrandMean Well
-
SeriesMean Well XLC Series
-
Power Rating60 Watt
-
Output Voltage60 Volt
-
Rated Current1.4 Ampere
-
Input Voltage110V~305V
-
No of Output1
-
Dimming Control10V PWM,1-10V,Resistance
-
Standards MetCB,CCC,CE,EAC,ENEC,SELV
-
Operation ModeConstant Voltage
-
Operating Temperature-25°C~90°C
-
Warranty5 Year
-
Length6.93 in
-
Width1.26 in
-
Height1.77 in
::specification::
Frequently Asked Questions
Can I use the XLC-60-H-BN for dimmable LED downlights where I want to set current without opening the fixture?
Yes. The XLC-60-H-BN combines 3-in-1 dimming with NFC-based current setting, letting you adjust the output current between 0.9A and 1.7A using an NFC-enabled device without physical access to the dip switch. This makes it well suited for recessed LED downlights that are difficult to reach after installation.
Is the XLC-60-H-BN suitable for driving LED modules in indoor signage where dimming is required?
Yes. The driver provides constant current across the 9–54V CC range at up to 60W with 3-in-1 dimming, suitable for indoor LED signage modules that require brightness control. NFC current programming adds flexibility for adjusting light levels on installed signs.
Can I use the XLC-60-H-BN in a small LED array where current must be fine-tuned after installation?
Yes. NFC current setting allows post-installation adjustment of the constant current output within the 0.9A to 1.7A range without rewiring or opening the enclosure, which is useful for LED arrays that require commissioning on-site.
What dimming methods does the XLC-60-H-BN support?
The XLC-60-H-BN supports 3-in-1 dimming: 0–10V analog, PWM, and resistance control. Current adjustment is done via NFC rather than a dip switch, differentiating it from the XLC-60-H-B.
Is the XLC-60-H-BN suitable for use in cold-temperature environments such as refrigerated display cases?
The XLC-60-H-BN has a rated operating range of -25°C to +90°C. A -25°C lower limit makes it suitable for installations in cold storage or refrigerated environments, provided it is installed within an appropriate enclosure for built-in use.
How does the XLC-60-H-BN differ from the XLC-60-H-B?
Both models are 60W, 1400mA constant-current drivers with 3-in-1 dimming and a 9–54V CC range. The key difference is the current-setting method: the XLC-60-H-B uses a dip switch, while the XLC-60-H-BN uses NFC programming, eliminating the need for physical access to set output current.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other XLC-60 Models
25 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
