Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well XLC-60-H-BSN LED Driver 60W 1400mA 9~54V Constant Power, 3 in 1 Dimming with Strain-relief, NFC Current Setting
Notify me when it's back in stock
Your order will be processed within 24 hours
Mean Well XLC-60-H-BSN LED Driver 60W 1400mA 9~54V Constant Power, ...
Key Features
- ✓Constant power mode output with multiple stages selectable by dip switch or NFC setting(H-type)
- ✓Constant voltage mode output (12V/24V/48V)
- ✓Plastic housing with class II/2 and PFC design
- ✓Flicker-free, complying with IEEE1789/ErP
- ✓Standby power consumption <0.5W
- ✓Meet emergency lighting (EL) function application
- ✓Minimum dimming level 0.1% (DALI-2 DT6)
- ✓Dimming functions: 3 in 1 dimming (Dim-to-off) DALI-1 + Push dimming
- ✓5 years warranty
-
BrandMean Well
-
SeriesMean Well XLC Series
-
Power Rating60 Watt
-
Output Voltage60 Volt
-
Rated Current1.4 Ampere
-
Input Voltage110V~305V
-
No of Output1
-
Dimming Control10V PWM,1-10V,Resistance
-
Standards MetCB,CCC,CE,EAC,ENEC,SELV
-
Operation ModeConstant Voltage
-
Operating Temperature-25°C~90°C
-
Warranty5 Year
-
Length6.93 in
-
Width1.26 in
-
Height1.77 in
::specification::
Frequently Asked Questions
Can I use the XLC-60-H-BSN for recessed LED downlights where both strain-relief and contactless current adjustment are needed?
Yes. The XLC-60-H-BSN combines output cable strain-relief with NFC-based current setting, allowing the constant current to be adjusted between 0.9A and 1.7A without physical dip-switch access. This combination suits hard-to-reach recessed downlight installations.
Is the XLC-60-H-BSN suitable for dimmable LED signage in locations where cable stress is expected?
Yes. The strain-relief protects the output cable from mechanical fatigue, and the 3-in-1 dimming interface supports 0–10V, PWM, and resistance control signals common in signage control systems. The driver delivers 60W at 1400mA across a 9–54V CC range.
Can the XLC-60-H-BSN be used in LED arrays installed inside equipment cabinets where cables pass through grommets?
Yes. The strain-relief makes the XLC-60-H-BSN well suited for equipment cabinets where the output lead passes through a panel grommet or is routed under mechanical tension. NFC current adjustment allows fine-tuning after the driver is enclosed.
What is the NFC programming range for current adjustment on the XLC-60-H-BSN?
The XLC-60-H-BSN allows current to be programmed from 0.9A to 1.7A via NFC using a compatible device. This replaces the dip switch found on the XLC-60-H-BS, enabling contactless configuration without opening the luminaire.
Is the XLC-60-H-BSN rated for operation in low-temperature environments?
Yes. The XLC-60-H-BSN operates from -25°C to +90°C, making it appropriate for installations in cold environments such as refrigerated display lighting or cold-climate outdoor luminaires (when installed in a suitable enclosure for built-in use).
How does the XLC-60-H-BSN compare to the XLC-60-H-BS?
Both models are 60W, 1400mA constant-current drivers with 3-in-1 dimming and output cable strain-relief. The distinction is the current-setting method: the XLC-60-H-BS uses a dip switch, while the XLC-60-H-BSN uses NFC programming for contactless current adjustment.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other XLC-60 Models
25 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
