Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well HVG-65-30AB Power Supply 65W 30V - Adjustable and Dimmable
The HVG-65 is a 65W Mean Well power converter (input range: 180~528VAC).
Key Features
- ✓ Input voltage range: 180~528VAC
- ✓ DC output voltage adjustable ±10%
- ✓ 3.75KVAC reinforced I/O isolation
- ✓ Protections: Short circuit / Over voltage / Over temperature
- ✓ Active PFC — meets international energy efficiency regulations
- ✓ Safety approvals: 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750(type”HL”), CSA C22.2 No. 250.0-13, EAC TP TC 004, IP65 or IP67
- ✓ 3 years warranty
-
BrandMean Well
-
SeriesHVG Series
-
Power Rating65.1 Watt
-
Output Voltage30 Volt
-
Rated Current2.17 Ampere
-
Input Voltage180V~528V
-
No of Output1
-
Dimming Control10V PWM,1-10V,Built-in Potentiometer,Resistance
-
Standards MetEAC,FCC,UL
-
Operation ModeConstant Current,Constant Voltage
-
Operating Temperature-40°C~80°C
-
Warranty5 Year
-
Length7.44 in
-
Width2.42 in
-
Height1.45 in
-
Weight1.7 lb
::specification::
Frequently Asked Questions
Can I use the HVG-65-30AB for a 30V constant-current LED display or illuminated sign?
Yes, if the display or sign is built for constant-current operation within the 18-30V range. This model provides 30V output at 2.17A with a maximum output power of 65.1W.
Is this a good choice for 30V LED cove lighting or accent lighting fixtures?
It can be used with 30V constant-current lighting fixtures that stay within 65.1W and 2.17A. It is not intended for constant-voltage LED products, so the fixture's electrical requirements need to match the driver's constant-current mode.
Can the HVG-65-30AB be used for outdoor architectural lighting?
Its IP65 water-resistant enclosure makes it suitable for outdoor architectural lighting where the driver is exposed to dust and water spray. It should still be used in a protected location rather than anywhere requiring submersion protection.
How do I estimate the maximum LED strip length for the HVG-65-30AB?
Use the driver's 65.1W maximum output and divide it by the strip's rated watts per meter. The formula is 65.1W ÷ strip W/m = maximum theoretical length, but check your strip rated power per meter and make sure the strip is compatible with a 30V constant-current driver.
Is the HVG-65-30AB okay for hot, cold, or dusty locations?
It is rated for operation from -40°C to +80°C, which covers very cold and very hot environments. The IP65 rating also means dust-tight protection with resistance to water spray, so it is appropriate for demanding indoor or sheltered outdoor conditions.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other HVG-65 Models
26 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
