Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well HVG-65-42AB Power Supply 65W 42V - Adjustable and Dimmable
The HVG-65 is a 65W Mean Well power converter (input range: 180~528VAC).
Key Features
- ✓ Input voltage range: 180~528VAC
- ✓ DC output voltage adjustable ±10%
- ✓ 3.75KVAC reinforced I/O isolation
- ✓ Protections: Short circuit / Over voltage / Over temperature
- ✓ Active PFC — meets international energy efficiency regulations
- ✓ Safety approvals: 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750(type”HL”), CSA C22.2 No. 250.0-13, EAC TP TC 004, IP65 or IP67
- ✓ 3 years warranty
-
BrandMean Well
-
SeriesHVG Series
-
Power Rating65.1 Watt
-
Output Voltage42 Volt
-
Rated Current1.55 Ampere
-
Input Voltage180V~528V
-
No of Output1
-
Dimming Control10V PWM,1-10V,Built-in Potentiometer,Resistance
-
Standards MetEAC,FCC,UL
-
Operation ModeConstant Current,Constant Voltage
-
Operating Temperature-40°C~80°C
-
Warranty5 Year
-
Length7.44 in
-
Width2.42 in
-
Height1.45 in
-
Weight1.7 lb
::specification::
Frequently Asked Questions
Can I use the HVG-65-42AB for dimmable 42V LED display lighting?
Yes, if the display lighting is a 42V constant-current load within the 25-42V CC range. The driver is rated for up to 1.55A and 65.1W, and this version adds adjustable and dimmable capability.
Is the HVG-65-42AB a good option for dimmable sign or cabinet lighting?
It can be, provided the sign lighting uses a 42V constant-current load and stays within 65.1W. Its IP65 enclosure makes it suitable for indoor use and protected outdoor locations where water resistance is needed.
Can this driver be used for architectural linear fixtures that need output adjustment?
Yes, this model is intended for 42V constant-current LED fixtures and includes adjustable output capability. Match the fixture to the 25-42V CC range and keep the load at or below 1.55A and 65.1W.
Would the HVG-65-42AB fit covered outdoor retail or hospitality lighting?
It can fit that type of application when the LED load is a 42V constant-current product and the location only calls for IP65 water resistance. Its -40°C to +80°C operating range also helps in demanding ambient conditions.
How much 42V LED strip can this driver support by wattage?
Estimate the limit by dividing 65.1W by your strip's watts per meter. That gives the watt-based length, but you should also check your strip rated power per meter and verify it is compatible with a 42V constant-current driver.
Is the HVG-65-42AB suitable for fully exposed wet outdoor locations?
It is IP65 water-resistant, so it is better suited to protected outdoor or damp locations than to applications that require a waterproof IP67 enclosure. The driver itself is rated for -40°C to +80°C operation.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other HVG-65 Models
26 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
